The Jalopy Journal
Hopefully we get an answer!
Got this gauge panel ages ago, but no idea who actually made it since there are no marking other than 760G on the back. Anyone have an idea of...
Selling my polished Edelbrock x-c8 crossram intake w/ original linkage. Also have some 1” wooden carb spacers.
[ATTACH] Selling my VS57 off my great grandfathers ford. Spins freely and was only used for a couple years. Has sat shelved for for ages.
I hope I have a copy of that since I have a massive archive of old Hotrod magazines I haven’t looked at in forever!
Thank you much for the quick response!
Hey, y’all. I got this Edelbrock intake from an old timer I bought my 36 Ford from that swore it was as rare as hens teeth, but it has nothing on...
325w, all the wiring is staying cool which made me think it was the resistor which I replaced w/ a modern ceramic unit that still did the same...
Yes, chopped51. Its glowing red hot.
As the title indicates, I put a Dennis Carpenter coil adapter on my 36 since I couldn't find a stock 3 bolt replacement and now the ballast...
I am selling my X-F8 edelbrock crossram for short deck windsor engines (260, 289, 302). It comes w/ a single 450cfm holley since the second carb...
I have an Edelbrock Xf-8 crossram for sale since I've decided to go w/ a tunnelram instead. It has the original linkage and one 450CFM holley carb...
Broke some teeth on the pinion gear in the roadster unfortunately and just got around to dropping the center section to assess the damage, but not...
Thanks! I was about to pull out the slide hammer...
So it looks like I toasted an axle bearing on my roadster. I have ZERO experience w/ these olds/poncho 9.3 rear ends and assumed I'd be able to...
Thanks CTaulbert! You're spot on. I just broke the ends loose and checked the pitch. It is indeed solid and 11/16-24. I'll give these guys a...
I am trying to source an externally threaded 11/16-18 tie rod tube (in chrome if possible) for a model A w/ 40 ford brakes. It looks to be...
Thanks! It's seemed to get slightly better after running for awhile. Going to check the plugs again in the am and go from there...
My 1936 (stock engine) tudor is having some idling issues. I was driving it home one day and it died out of nowhere like it ran out of fuel....
built in 1958 by joe furiani. ran a best of 11.1 @ 125 in 1962 w/ an injected 372 olds rear w/ spooled 5.13's, 63 vette t-10 unrestored b/gas drag...
Thanks for the reply! I have little knowledge about these engines and really only have a shop manual for reference which says this is a lincoln...
I started having some issues w/ the 36 (ford tudor) which has a stock v8 and I suspected points. Upon pulling the caps and coil off, I...
283 heads? not positive though...
looks bitchin on the whites!
I'd go with gold myself.
Thanks for the info
I thought there were around 12:1. Do you know what brand they are? They possibly look cast, but its hard to tell right now.
I picked up one of the roadsters previous engines earlier this week (327). Trying to identify the pistons to get an idea of what CR will be w/...
to get the galaxie on the road...
Well, I was hoping to come out tonight but the damn roadster started running like shit when I took it out earlier today. Next time I hope to...
Separate names with a comma.