The Jalopy Journal
Nice! ^
Thanks Wizard! It hinges/rotates at the hood and down by the core support. The springs keep it in tension so it can sit in the partially open...
[ATTACH] Here's the hood unlatched and pulled forward.
[ATTACH] [ATTACH] Will see what pictures I have. Traveling this week. I used the Buick LeSabre setup with a lot of mods. I had to push the...
[ATTACH] [ATTACH] Here's my 55 88. No radical body mods other than shaving some trim and emblems. Full custom interior, flipped hood hinge,...
Actually about 400hp 4l65E and 350:1 rear. If I keep at least the same amount of radial contact on the axle tube it should provide the same...
[ATTACH] 55 Olds 88 with a 9" and Speedway rear disc set up. The factor bump stop will hit the emergency brake cable. I wracked my brain...
I bought the remote fill kit but haven't installed it yet. I am able to fill through the glove box opening. I removed the glove box and have...
Didn't have any issues with the Scott's product at all. It seems really solid. Had to reinforce the firewall and make mounting brackets for it,...
I'll see if I can get any more out of it. From what I saw, the MC has a 1 1/16" travel and I measured about 1" of travel where it's at. Just...
OK, it's fixed!! That was it. I had adjusted the 90 degree heim joints out as far as they would go and thought the pedal was up hitting the...
Master at highest point, no residual valves. Did test the prop valve with a test light & it's fine. Couple additional pieces of info. This is a...
MC bench bled for half an hour..... Power brakes, 7" single diaphragm booster. I have the pin adapter in place behind MC. Have used the...
31Vicky, I am thinking you nailed it. I have been trying to understand all of the math and I will go out and remeasure my pedal to confirm the...
I guess I will bleed the front lines some more.......
MC highest point of system. Forgot to mention, that yes, the bleed valves are up top on the calipers.
No worries, yes it is correct MC I just talked to the tech at CPP. I actually just installed a new one this morning because the first one had sat...
55 olds 88 custom. Fatman front with 69 Chevelle calipers, custom 9" rear with speedway rear caliper kit (Seville calipers with parking brake)....
[ATTACH]
Researching my latest project (1960 Dodge D100 Utiline). Looking at chassis options. Where is the best place to get the chassis dimensions? I...
Ok, so a few pages back, it was stated that the Tuff Guard garden hose would work? It's a 5/8" inside diameter. Now, up a few posts it's says...
Appreciate all the info Gary. I'm gonna start gathering stuff. Thought I'd search for an off-the-shelf metal enclosure that I can modify as wood...
One last question Gary, do you have the basic inside enclosure dimensions? Thanks again! Joe
Thanks Gary! That looks awesome. Can you give some details about how you transitioned from the motor outlet to the garden hose fitting? And...
Would be interested in building my own as long as there is a complete part list available. Does anyone know if the fine woodworking article is...
Sorry to hear about the loss of your friend. Joe
I made my motor mounts for mockup on a 3D printer before cutting and welding real ones.
57ford, thanks so much for the awesome pictures. We relocated to AZ from Ohio 7 months ago and the Columbus Goodguys show is one of about four...
Zaino Bros. Wax is old school though........
Thanks everyone, I'll squirrel away all of the parts until I'm ready to do the install. Sure hope I don't have to make an opening like that on...
Separate names with a comma.