The Jalopy Journal
I have a 1965 marine 427 out of a Chris Craft . It was cast as a side oiler but machined as a center oiler. It was rated at 300 hp and has mostly...
Steel body 27 T roadster , 250 Chevy with 307 pistons , comp cam , Offy 4bbl intake with a 450cfm Holley . Turbo 350 trans and a 46 Ford banjo...
[ATTACH]
I remember looking at and studying the front end on that car years ago . To me it is a scary piece of “engineering “. I used to attend that cruise...
Over driving the water pump works so well that Chevrolet did it for air conditioned corvettes from the factory in the early 70’s. I have 3 cars...
As a retired cop from CT I can tell you with some certainty that most of the folks on the job now have NO IDEA about fender laws. If you are a...
You mentioned an intake manifold swap in the past. I have found with the FE’s Don’t run the cork china rail gaskets on the block but use a bead of...
C&G is great to deal with and they ship parts to me faster from California than Dennis Carpenter does and he is just 100 miles away from me. And...
RAC Gauges
[ATTACH] [ATTACH] [ATTACH]
My 51 in front of the same store just recently, it’s about 10 miles from my house. [ATTACH]
I’ve been down this road and I generally do exactly what you did and then .... Try a different coil and if that doesn’t work put the points and...
That breather should have a can on top of it with a bolt through the center . The assembly is held onto the block by 2 bolts There should be an o...
Nice job Ted and I am impressed with your skills in both metal and wood work , well done sir. Spoke to Charlie tonight and he is pretty excited...
If you have a Load O Matic distributor you will need to change that as well if you change the carb. The car will perform better , mine sure did.
I had a similar problem with my 56 Merc that I did a similar disc brake conversion on . I changed the fulcrum on the brake pedal to increase the...
Joe Bunetic www.ford6vcarburetion.com probably one of the most knowledgable people in the country on Ford tri power set ups. He will be able to...
The other place you could try is Mo-Ma Manufacturing in Albuquerque , They are gauge restoration specialists. 505-766-6661
Lots of good info here. The only thing I can add is to give Casco Thunderbird a call. They are parts dealers for baby birds and also have a...
Found the seal that fits, Precision WCRD618 . Glass guy got real close to getting it in but the glass would not stay put in the top groove making...
Just tripped over this old post . I am having the same problem with my 62 Galaxie 500 2dr hardtop. Can't pull the windshield in at the bottom. I...
Older thread but still valid and helpful . Figured I would add my experience and fixes . I have a 27 T on a custom chassis , suicide front end ,...
If you google 1957 mercury sales brochure the brochures show light green as the valve cover color.
[ATTACH] The man in another one of his creations .
Yes distance is the same and the pulleys lined up just fine.
[ATTACH] I have a 354 in my 30 Ford and had some cooling issues . Did some measuring of my pulleys and found that my waterpump was running at 80%...
Correct sir, Washington Blue and thanks for the compliment.
Separate names with a comma.