The Jalopy Journal
Have any of you tied the wet blasters that they sell online for about $100. ? They attach to a pressure washer and have a siphon hose that goes...
Does anyone here know the OHM range for this fuel gauge? Typically SW is 240-33.5 but I’ve never used one this old and don’t know if they’ve...
Some of y’all are straight up going to have a heart attack at the mere mention of this but, I assure you if you remain calm and follow along...
1952 Chevrolet Thriftmaster 3100. California truck, No Rust Ever, 1958 235 engine, 4 speed transmission, closed driveline. New interior....
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I don't get around quite as well as I...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Stock flathead powered coupe. Runs & drives great.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
We're starting a new project to build Chris Magee's 32 five window. He has been collecting all the parts and building the car in his head for a...
[ATTACH] [ATTACH] Six cyl & 3 speed pulled from a 51 DeSoto. Turns over, don’t know anything else about condition. $100. Local pick up only.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Here’s one way to chop an AD Chevy truck. Not the only way, this is just the way we're doing this one. We don’t want to lean the posts back or...
I've got a 40 Ford column drop with a switch lever on it and I bought switch replacement parts in an effort to rebuild it and make it work but,...
http://highway99hotrods.com/Events/GNRS2017/index.htm
I've got a car in the shop with a 216 Chevy engine that has a crack in the water jacket on the left side of the block about an inch and a half...
I have a 36 Ford banjo apart because it was leaking from where the bells bolt to the center section. I know that the gasket thickness is critical...
Follow along as we hop up this cab and give it a bit more attitude. [ATTACH] [ATTACH] [ATTACH] The plan is to swap in a hot rodded 59AB, a five...
Actually it was an autumn vacation but it’s still over 90F here so, it feels like summer. Morty invited me to ride shotgun in the HopUp Staff Car...
[ATTACH] Posted using the Full Custom H.A.M.B. App!
anyone interested?
What's the hot tip for changing a 51 Buick from a three on the tree to a modern(ish) automatic trans. I know these could be optioned with a...
I built a new lid for my black roadster. I made the header and bows each in two pieces so it will break down and fit in a bag about the size of a...
http://www.highway99hotrods.com/Events/40Ford2014/index.htm
[img] [img] [img] [img] [img] [img] [img] [img] [img] [img] [img] [img] Hundreds more pictures at:...
Anybody know what this instrument cluster is from? [ATTACH] Posted using the Full Custom H.A.M.B. App!
[ATTACH] I'm already talking with another HAMBer about some stainless trim. Got to find some front fenders too. Posted using the Full Custom...
http://www.highway99hotrods.com/Events/GNRS2014/index.htm
289 with an AOD in a 40 Ford. The engine has 1970 351W heads with 60cc chambers, .030 flat top 4 relief forged pistons, A dual plane Edelbrock...
http://www.highway99hotrods.com/Events/Pton13/index.htm
I didn't take all of these. I stole the chip out of Carp's camera before he got on the plane to Oz....
We have bought and sold, bartered and traded, and even given away sheet metal brakes in my and my brother's shops in recent years. Lately we've...
Separate names with a comma.