The Jalopy Journal
I used Rusty Hope stuff on my 50 Plymouth. No problems. Sent from my iPhone using The H.A.M.B. mobile app
I’m sure there are other sources but I’m sure these guys could help you out. https://www.vintagepowerwagons.com/online-parts-catalog Sent...
Currently running a 218 flattie. I’ll be pulling the motor/trans brackets, linkages etc from mid 80’s Plymouth. Sent from my iPhone using The...
Small block Mopar/904 trans. I like the flathead but traffic around here is regularly moving at 70+ on the highway and I’d like to be able to at...
I have a 50 Plymouth. I relocated the front shocks, added disc brakes, cut one coil off the springs and added a Jeep Cherokee sway bar. I’ve been...
Love Shack by the B-52’s “Got me a Chrysler it’s as big as a whale” Sent from my iPhone using The H.A.M.B. mobile app
What he said. I used an ECI under floor master, Cherokee rear axle and Rusty Hope front disc kit. No complaints with any of it....
Love those big 50's Mopars. I used this adapter when I put an S-10 T-5 behind the flat 6 in my 50 Plymouth. I did the swap about 5 or 6 years ago...
When I did a disc swap on my 50 Plymouth I had the exact problem you speak of. Hours of head scratching and I couldn’t figure it out. I pulled the...
A very similar switch on the door post of my 50 Plymouth. Common in lots of Mopars I think. [IMG]
The Cherokee rear has 3.08 gears. Other than welding on some perches it’s an easy swap. I cut the old perches off the original rear and used them....
I used a mid 80’s T5 from an S10 truck. Paid $75 for it, installed it and hoped for the best. Still running strong years later. No e-brake for the...
I put a T-5 from an S-10 behind the 218 flathead in my 50 Plymouth about 6 years ago. I did a bunch of online research and ultimately stumbled on...
My 50 Plymouth [ATTACH]
Front shock relocation. http://rustyhope.com/site/shock-arms/
1000 sq ft well insulated shop attached to my house. I’m using a 30ft radiant tube fed by natural gas I leave it set at 50 degrees Fahrenheit all...
Several threads on here reference that subject. Try a search I'm sure they'll show up. I'd post the links but don't know how. I'm going to try...
I don't get anywhere near enough HAMB time but I'm glad I stumbled onto this thread. What a great read and fantastic photos. It's already been...
Great thread. Subscribed.
I had good luck here. http://rustyhope.com/site/
Would love to see some pics of your installation. I'm considering a 5.9 swap for my '50 Plymouth with an early Cuda drivers side exhaust manifold...
I used this for front brakes on my 50 Plymouth http://rustyhope.com/site/ and this for a master cylinder...
I had the same problem with my 50 Plymouth when I converted the front to discs with a new underfloor master cylinder. Turns out the c clip that...
Congrats on picking up that Plymouth, looks solid. I've done most of the updates your thinking about. I rewired the entire car with an aftermarket...
Good video describing u-joint angles and phasing. My apologies if it's been posted before. [MEDIA]
I used Rustyhope stuff and a pedal bracket and master from ECI on my 50 plymouth and have been happy with both. http://www.ecihotrodbrakes.com/...
No problem. Gotta Keep those under appreciated Mopar's alive.
I scanned a P23 wiring diagram. Hope it helps. [ATTACH] Get yourself one of these. I found it on ebay relatively cheap [ATTACH]
If I recall there is a couple of bolts tucked in the area under the carb. Might be hard to see if it's full of grease and assorted crud. I've...
Separate names with a comma.