The Jalopy Journal
No worries @Atwater Mike Would I be able to disassemble the spring and drill through it to move the axle forward 1.25" (relocate the pin)? I may...
Ask them what the max voltage their are able to handle. I had one in my 51 (switched to 12v) and for some reason it was getting over 13.6 volts...
[ATTACH] [ATTACH]
Picked up some hardware for the little Sport Coupe at GNRS a couple weeks ago. [ATTACH] [ATTACH] [ATTACH]
Looks like I'm back in the banger club. Picked up a 31 Roadster. Going to keep it super traditional, mechanical brakes, no windshield, hi-boy....
I used a kit from Rebel Wire. They are a HAMB alliance vendor, great to deal with and sell a premium product. Very easy to use. Just go one...
Thanks. That number is disconnected as I mentioned in the initial post. Michael reached out to me and finally sent a tracking number. They don't...
Does anyone have it? The number listed on their website is a fax line, and their old 608 number is disconnected. I placed an order almost two...
If you let a motor sit for quite a while, after being broken in, it would be in your best interest to prime the motor with oil-typically pulling...
Yep!! 29 Model A sport coupe 31 Model A roadster 54 Ford F100 55 Mercury Monterey 66 BSA A65 Spitfire chopper 73 Triumph T140 76 Pontiac...
It's getting there! [ATTACH] [ATTACH] Picked up another project as well! 30/31 Roadster!!! Going to be a banger with mechanical brakes, pre-war...
I bought the belt rail and b-pillar wood from fordwood.com if I remember correctly. I bought two of the top bows at a swap meet, and some misc....
As long as you let them cool slowly you should be fine.
Found the generator belt. Used a piece of Romex to get the measurement. 51” seemed to be it. [IMG] Sent from my iPhone using The H.A.M.B....
Will do @AVater going out to the garage to fiddle with it right now. Thanks!
If I had any old ones I would do that. Might just have to use rope or something to try and get the length close. Someone may chime in with a...
I’m running the 3/8” two belt setup and need to find out which ones I need. Trying to find them locally so a Napa, Gates, or Oreilly part number...
Got the motor mounts in, carb on and a few other things. I welded a plate from the outside of the motor mount onto the outside of the frame....
Thanks @PAracer
Thanks guys, I will order up one of the degree markers and fab up the tool in the above mentioned link. So just to be clear, the axle must be...
Hey guys, tried the search function but no answers just yet. I split the wishbones on my car and it seems the axle is pulled back and under the...
Got the crossmember in, transmission buttoned up, and almost got the motor in. Ran out of time this weekend but will make more progress this...
Over the weekend I finally found the old style 70 amp breaker I needed for the main panel, ran a 50 amp sub panel in the garage and cleaned out...
Sent him a message. Thanks Tex!
I was in contact with a guy that has a shop in TJ and can't find his info. Does anyone know of the guy I'm talking about? He used to be on the...
BTTT make offer. Need the money.
Here it goes boys. She's up for sale. Build yourself a TROG racer or T modified on the A frame. EAC Mercury flathead V8 with 4" stroke. Good...
Been working on my house non-stop. I have some commitments over the next two weekends, then it's full steam ahead and I'll get it back on the...
Had a few of the boys over on Saturday. Made some progress in the transformation. [ATTACH] Out she goes!!![ATTACH] And off to it's new home....
It would be nice to keep the banger without pumping a ton of money into it. I want to drive safely on the California Highways but the banger...
Separate names with a comma.
The Jalopy Journal
