The Jalopy Journal
Paul did you chop the windshield? It looks awesome
https://www.amazon.com/Timken-5BC-Bearing/dp/B00460HDQ4
i think it's 5bc
I think that you are correct, Thanks for your comment
Nice Thanks for taking the time
What motor does this cam fit? It’s an energizer h10 272. NOS. For sale btw Thanks for your time
Bump I hope that you guys have some pictures and ideas Thanks
Please post pictures of crossmembers and wishbone mounts for AV8 or similar. What did you use for clamps to hold the ball in? I will be using a 35...
I still don't understand. Are the red and blue plastic gauge colors?
I know (or at least I think I know) That these are 59a mains but what does the red- blue mean? I was looking for standard bearings for a 59a ICM...
Thanks and keep them coming. I am using an 8ba and I’m going to shorten the torque tube. F1 crossmember and 39 3 speed.My buddy has a 29 RPU with...
Please post any pictures of a cut/adjusted 28 av8 stock firewall. How did you guys do it? Thanks
Thats a great idea, Thanks
I've found some info about intake manifolds. the ones with the angled carb mount are open drive intakes and the ones where the carb mounts...
The build is on YouTube. Model A Metal is the channel. The car is called the rescue dog build
Is it safe to say that the torque tube should be level at ride height? I think that in order to get me carb level I will need to be at the top of...
I have a 33-36 front axle. Scrub does not look like it will be a problem.
Because I want to get back of the trans and torque tube under the stock crossmember and the angle of the carb/ intake has the motor at enough of...
Most AV8 motor mounts are attached just under the top of the frame. It looks like it would be better mounting it lower. Does anyone have pictures...
NealinCA thanks for your knowledgeable response. I appreciate it
Good question I think they are both repops
Has anyone had experience with the F1 steering replacement worm and shaft to know the difference? CPP has it for $129 and Van Pelt has it for $265...
we wound up cutting a piece of tube, cut a notch in it and used a 3 finger puller. It bugged up the whell but that didn't matter to me. If I...
F1 does not have the threaded holes to use a puller
What have you guys tried to remove an F1 wheel?
I have a set of 4 1/8 stroke x 3 3/8 going in a 59a block. I could use help finding a supplier for piston rings. they are elgin pistons. I may...
What supplier has the best price for AV8 F1 steering box flanges? I like the one with the pilot flange for the hole saw. Or does anyone have a set...
good point alchemy! I intend to try to move it back as far as I can without cutting the fire wall. After your comment it will have to be at least...
I'm about to try this. I'm pretty sure that the bone I have is a 35. At first glance and pulling a tape it looks like the ball will fall really...
Corn Fed.. I heard that the internals could be swapped. If anyone has pics of a cross steer box mounted to a model A frame I would love to see...
Separate names with a comma.