The Jalopy Journal
Very interesting! You definitely don't need to pull the shifter towards the wheel to get it out of park! Okay, I've got a pretty solid list of...
Hey fellas, I just picked up a pretty complete and clean 1961 Cadillac Sedan Deville. It runs quite well, and the transmission seems to be pretty...
Hello fella's... I've got an old '30s Ford traditional hot rod/frankenrod project going. I'm in need of some help! I'm installing the engine...
What are you guys thoughts on pivoting the inner pivot point of the column shifter off of the frame. I imagine that Ford did it the way that they...
Man, it's now a week into March 2021. I started trying to address this when I originally posted to this thread back in November 2020! It was...
I also had to swap the older water pump housing out, in place of the newer one. I needed (wanted, to reduce expense) a mechanical fuel pump,...
Interestingly, the new engine has a hydraulic flat tappet camshaft! Its a Comp Cams cam. That's what mostly made me think that I was reading the...
Incredibly helpful info, thank you so much! Yes, I agree. Those wheels are hideous! They came on the car and my son likes them, so I try to...
Hello gents, This may not be a perfect forum for this topic, BUT I am certain that many members here will have a definitive answer to my...
I'm with Mr. E. My '59 has the rectangular recirculating heater. My core now leaks. I cannot find a replacement. I'm hoping that a local...
I'll chime in, since I mess with both. Both are quite capable. Every Edelbrock that I have bought has run better out of the box than any Holley...
True! I definitely need to do a bit more research and figure out a definitive path to take this project. Gonna go read the links provided above...
I appreciate all of your guys' responses! Man, that's no joke. Even with a freshly rebuilt engine, this thing is a turd! But, with it new full...
Hello all, I've recently acquired a 1957 Plymouth Savoy 4 door sedan. This Plymouth, for one, will NOT be a "Christine" clone/wannabe. For now,...
Thanks everyone! Going to look at it at 2pm. I like the car. Anxious to see how it looks in person. I have a garage stall for it, so that will...
Sorry! Technical difficulties with attachments due to some beers, and a couple of vodka/tonics! Nik
[ATTACH] [ATTACH] [ATTACH] Here's my current old trucks:
Hello all, My name is Nik. I've introduced myself before, but I've been away for a long time, so, here goes. I currently own a '59 Chevy Apache...
A little help please. It is time for me to purchase a radiator for my '59 Apache. It has a small block and 700r4 tranny. I was going to purchase...
Does anyone know if a '98 suburban rear seat will fit well in a 55-59 cab? I have that or a 2007 Tahoe rear seat with integrated seat belts....
Glad to hear that your ok! The earlier you go the better! I had to get my eyeball drilled last week because i suffered for four days with a...
gotcha. Its not going to sit too low. Just using factory camaro springs, not drop spindles or anything. Will go to big block springs if...
thank you! Yes, it's the first time for me. Its going really smooth though.
Got some more work done on the '59. I got the '59 frame flared out to accept the IFS. I heated up the frame, top and bottom just in front of the...
If I end up needing to narrow this thing, do folks usually narrow the arms? is there a co. that sells nice tube arms that are narrowed? Or do...
I will need to measure the stock axle and camaro ifs and see what the difference will be. I'm running 6" wheels with 3 3/4" backspacing. I'm not...
What a transformation! Good job, keep up the good work. What are you doing for the interior?
I lucked out with this truck. Hardly any rust at all. Floor boards are good, cab corners are solid. It was well taken care of through the...
Thank you. I'm hoping it will be. I'm going to bet back at it on monday. I should get it all welded and boxed in by then. Then I will just...
Separate names with a comma.