The Jalopy Journal
Here's a mickey mouse sounding way of finding TDC. Using a flashlight, try to turn the motor to what looks like TDC looking through the spark plug...
My car was missing when I went around corners occasionally and sometimes in a straight line. At one point it stopped completely. I had no spark at...
I was having trouble with the band sliding forward. On the vertical side panel near the top just before the seem, the ridge that's suppose to keep...
I've looked at a couple of sites to figure the proper springs I need. One thing I didn't see mentioned is "usable remaining" shock stroke. Once...
You can also jack up your car and put 2x4s under one of the rear tires simulating going in a driveway etc., and see how much your clearance changes.
I'm replacing the rear fender well panels and I noticed the panel, along the bottom edge, is not attached to the subrail, just bent behind it, for...
Thanks. I'm new here, so appreciate your help.
I bought a 1930 coupe last summer and it has plywood floors. I just pulled them out as I'm remounting the body and I'm considering putting metal...
Thanks for your help.
Thanks, will do.
posted twice, sorry
I'd like to get some ideas of different ways to paint the frame and how to do it. Spray can, spray gun, primers, paint types etc. Any help would...
I don't think the body touches anywhere. Wayne
I'm mounting a 1930 5 window coupe body to the original frame. It's a high boy with no running boards or splash apron/gaurd. Do I still need the...
It's a high boy with no running boards or splash gaurds. Do I still need the webbing or can I run the wood directly against the frame and the body...
I'm looking for a "GOOD" set of wood mounting blocks. A friend of a buddy bought a set and he said they fit piss poor, sloppy and could rotate...
I bought a 30' 5 window coupe and the brakes were hard but didn't stop for beans. It was not power brakes and when I checked the ratio of the...
How freakin nice is that!! Great job.
We bought a 30 Ford Coupe not too long ago. The car is open between the trunk area and the inside of the cab. I haven't looked at it closely as...
I bought a 1930 model A with Firestone 14.00x31.00x15 tires on 10" rims. I believe the recommended rim width is 13-16". What problems could this...
I'm a machinist and know nothing about transmission shafts. I do know the 10mm metric thread comes in two pitches. 1.25mm or 1.5mm. That would be...
Separate names with a comma.