The Jalopy Journal
A month or two ago I posted that I have picked up a 350 w/ 305 heads and got some good responses on why this was done.Well the weather has gotn a...
Trying to figure out this motor I got.Under the valve cover was 14022601(305ho)back of the block 3970010(1968 327,1969-79 350).Why would this head...
sbc 350.I'm finding to small puddles of antifreeze on/around the second set of bolts on the front of the intake.It is an Edelbrock performer...
I'm having cold and hot start problems w/ my 350.It has a mild cam,edelbrock performer intake and carb,Gear drive.Headers.The motor stumbles, cuts...
Running a 350,mild cam, shorty headers,2 1/4 pipe with x-pipe,exits at the rear,generic mufflers.I'm new to the SBC 350 and I`m searching for a...
Im trying to find some info in what tooth flywheel I have,Motor is a 350,I was able to see these numbers through the bell housing on the...
I just picked up a 89 chevy truck with a 350 crate motor in it,all edelbrach parts,comp cams,gear drive(noisy)(donor motor for my 48),not on all...
I want to lower the rear of my 48 stylemaster,it still has the stock torque tube.Will I run into any problems doing this,and how far(safely) can I go?
Well I had one good hub cap out of what was on my car when I got it,the rest were rusted,bad-heres how I put it to use[IMG][IMG]
I was reading a post on here about snake issues in/arround cars and the topic of spiders kept coming up.I want to know any information you have on...
So it took a while but I realized every time I worked on my new project I was feeling like I had a cold for 3-4 day`s afterwords.Runny...
Car(48 chevrolet stylemaster) started went for a drive within a few minutes it was breaking up,made it home,shut car of,would not restart-no juice...
Ive done a search on here and only found info on fords being positive ground(years accordingly).Trying to figure out if my 48 chevrolet...
I picked up some late model steel wheels,there 15`s and well I got the rear on and assumed that if they worked/fitted well that the front would be...
Finally got the stylemaster on the road.......the steering box has a lot of play -like scary amounts,The book I have is very basic as far as...
I need to go through my 48 stylemaster and replace some wires.A lot are completely exposed.I also have found a lot of wires going to no where.Ive...
[IMG] These were in the back of a car I picked up a bit ago with some other parts,I cant figure out what car there from,are they even worth...
[IMG] Well found out the king pins are shot on my 48,so while thats all apart.I was able to take the springs out-time for some cutting,as you an...
[IMG] This is the split manifold I puchased,wanted one that has the heat riser
[IMG][IMG][IMG] When I got the car it had all the chrome primered grey.I painted the bumpers an almond color(guards have since been removed also)...
1948 chevrolet stylemaster--Im in the process of doing the king pins and control arm pins/bushings when Ive noticed that my shocks are dead,they...
I have a 1953 235 (head is 58-62) .The motor is in a 1948 stylemaster (3spd).Temp guage goes to 100 as soon as car is started,it doesnt move up or...
Ok here it is,I have a 48 stylemaster 3 spd with a 235(1953 block),848 head(56-62).You guys have been great sorting that out for me.I pulled the...
111
1948 chevrolet stylemaster,Its has the stock wheels,on there now is some really bad dry rotted bias ply tires.(these were on the car when I got...
Ok heres what info I got,Center distributer.Head casting number is 3836848. Gm 28. On passenger side above starter is LAA37I649 and to the left of...
Hello every one,Im lucky to have just purchased a 48 chevy 2 door stylemaster.Appears to be an older restoration,thats in need of some tlc.Im...
Hello all,I just picked up a 1948 chevrolet stylemaster 2 door.Any info will help.Im in the process of educating myself on this vehical.One...
Separate names with a comma.