The Jalopy Journal
I'm fitting an 89 S-10 T-5 to a SBC. I'm using a 621 bell housing and 11" astro van clutch. So far, all I've had to do is cut some length off the...
In a major bind here... Looking for any helpful technique tips/tricks on changing out inner tubes on the skinny Akront wire spoke front wheels...
Edmunds 303 Oldsmobile intake. $450 shipped in USA [ATTACH]
Up for sale is a very nice pair of rear axle shafts from a 1940 Ford banjo rear end. The teeth look good as do the bearing surfaces. Seal area has...
PENDING 1939 Deluxe Horn button/light switch, original paint, the rod has very slight bend near bottom. I don’t see it being an issue. If you...
Set of 1939 pedals with no pitting or previous repairs. Most likely need bushings replaced. $200 picked up in Belleville, Mi. 48111 or I can ship...
My JJ name is ParklaneBill and I got a link for your site from a Hot Rod friend. I am producing a documentary on Don Lee, Tommy Lee and their...
cleaning up 28 years of parts from my shop. I've got these brackets I am pretty sure are for putting a motor in something. I used to sell 1937 to...
Heh I have a cool old headlight and mounting bracket measuring about 12 inches long. Does anyone have an idea of what car/truck this may have...
Just got my newsletter from the National Woodie Club and it has a LeBaron Bonney woodie RPU as a feature car. Even if it looks sorta stock it’s...
[ATTACH] Full Complete Set of Henry Ford Original Door Hinges for 3 Window Coupe in great condition. They are cast steel originals not bronze...
I haven't been real impressed with many chrome plating jobs done recently... I guess the chemicals to do it right aren't available anymore, is...
I have a friend with some neat looking old headlights on his Model A and neither of us have ever seen any like these before. They have a glass...
[ATTACH] A pair of Vintage Hurst Airheart 175H Double Spot, Double Action Brake Calipers for your Hot Rod, Sprint, Drag or Lakes Race car. The...
not sure that what the sound is, long term project truck with 350/350 has always made this squeal at start low rmp and stop - any ideas? Both...
I dig vintage flatbottom ski boats, hell, most vintage boats. While perusing photos on another site these pictures showed up with the owner not...
Changing water pump I found out why timing is off. If you look closely you will see damper against timing cover . It has been this way for a...
I have a Borg Auto clock out of a 1950 Ford I'm planning on putting into the dash. A former owner took the original out, and put an oil pressure...
I have a 1962 Fairlane 4 door that I have used cpp tubular upper and lower control arms and I have cut 1.5 coils off. It sits low and I like the...
I've a 58 Buick Special, with the original 364 engine, apart from the pistons being bored out to 0.40 and running it on lake pipes, everything...
Attended the Nnl today, some great models in the show[ATTACH]
I used to fool with springs a lot. I found it necessary to calibrate them. I made a rig so I could measure the deflection and the load and also...
For sale is a pair of magnesium 15x9.5 Halibrands. 5.5” & 5” bolt patterns. Perfect for a hot rod or drag car. In great shape $1850 can hold with...
driver, highboy, steel unchopped ,new wheels and tires, new walker/johnson radiator. four wheel disc. brakes, new vintage speed rebuilt rochester...
1929 model A RPU, complete and all original. Everything works, engine turns over easily, rolls, steers, stops. Tank will be fine with flush. I...
I tore apart my turbo 350 and found that 3 of the springs on the forward5 clutch drum are broken. There are 21 loose springs on my unit, anyone...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [IMG] It pains me to do this, but I am needing to sell...
good stuff, sorry no shipping [ATTACH] [ATTACH] [ATTACH]
Selling my 1930 roadster body. Needs panel below the rumble lid. Body was set up for 32 frame. Reach out to me for more info or better...
Separate names with a comma.