The Jalopy Journal
1934 Chevrolet Standard 4 door sedan. Panel was screwed over the back window opening and used for advertisement / yard art? Has all the inside...
Funky question but I'm looking to mount up Front Hairpin Radius Rods for my drop axel but I'm wondering if I absolutly need a cross leaf up top...
Anyone had trouble with their skirts rubbing the tires? I think they are foxcrafts. They were close when I first installed them so I actually...
A buddy of mine sent me these pictures. Any guesses on what this car is? [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Took me alot of hours to finish the 6 1/2" chop. I chopped the rear window 4 inches which involved 90 inches of weld grind hammer and dolly work....
Installed a Code 504 frame boxing kit and an X member from Dagels . Ladder bars from RJays 2 3/4 kick up
setting the motor and tranny in
I had to replace the rear passenger corner as the car had laid on its side for many years also had to replace metal in the belt line. This needed...
Oct 2023 After spending last summer squaring the body and fitting the doors I got from Flathead Dave I'm getting ready sandblast
30-31 Model A chassis after sandblasting
Body set back on the frame after sandblasting
After channeling the body and building new body mounts ,I built a new floor ,firewall and transmission tunnel
Vintage 2 position heater control switch. $10 + the ride PP friends and family or postal money order [ATTACH] [ATTACH]
This is a nice 97 that I rebuilt. Actually have 3 of these. They have the later EE-1 V base with the 2 upper nozzles and the notched venturis plus...
https://www.youtube.com/watch?v=jmnUyOz-wIQ[ATTACH]
Friend is doing a T5 in a 37 pickup using the stock rear end converted to open drive For the X member kit he used the parts from 40 Rag Top Down...
For Sale, 1955 Ford Station Wagon. Country Sedan 6 passenger project. Solid frame. Solid body other than the usual rot along the lower...
I have a top loader from a 68 Mustang with a tag number of RAN-S. It has the smaller input shaft and is 6 1/2 inches long. The offy adapter (304)...
These are left over from a bunch of used wood I picked up when trying to locate the various pieces I needed. You need them you can have them just...
Nice pair of upper hinges from a 30-31 coupe. Will need new pins probably. $50 + the ride [ATTACH] [ATTACH]
I am clearing out a bunch of my stuff and came across these bases from Vintage Speed. They came on 3 used 97's that I purchased for parts. All in...
I don't know if this is appropriate if not then delete. I was on my I-pad the other day and this ad pops up. Now Jegs ads pop up and I look at...
I am building an old school style 36 5 window that has a 400 SBC already in it. I would like to run a 3 Deuce setup in it and recently purchased a...
[ATTACH] [ATTACH] [ATTACH] This is a complete run in and Dyno tested 350 SBC suitable for a streetcar or restoration. See attached sheet and...
Century Lil Indian 400 2.5hp powder coated frame and 4" wheels, Indian Head tires. $1350 Lowell Michigan[ATTACH][ATTACH]
Separate names with a comma.
The Jalopy Journal
