The Jalopy Journal
I just flushed the coolant in Clarence. What should I do with the waste liquid? 50 years ago when I last drained coolant I probably just ran it...
For Sale: 1941 Ford 1/2 Ton Pickup Rolling Chassis. Rear End Gear Ratio is believed to be 3:78 with a stamping of “9 34” just below pinion....
x4 old chromed Strombergs. Even the bases are chromed! These came on a 4x2 set I bought on eBay recently. 2 of the carbs have chipped tops and 1...
Genuine Cal Custom Carson SBC oil pan in good condition, clean and decorated with a shabby, flaking coat of black paint. Has a small crack that is...
Body,parts and more parts,2 windshields one original and one brand new plus a title.. Perfect Hot Rod material..Will fit on Samurai...
Here is a hard to find S/W 5K "Recorder" tach from the 1960's. It has a brass cup, which means it's probably from the early part of that decade....
I have been struggling to find the correct starter to use with the Quicktime RM-8055 bellhousing. Holley has been completely useless and have...
Thinking about powder coating my front axle silver. Any body have pictures? [ATTACH]
These are dual range hydro factory parts, chromed in California early '60s. No scrapes or damage. Plating is really well done; pictures tell the...
[ATTACH] [ATTACH] 1942 Ford coupe roller. Needs floor work and other various patches. No motor or trans. Missing rear glass. It’s a good...
I've had my 40 deluxe coupe on the road for about 4 years. Works good but it has one aggravating problem. It's a 300 horse 327 backed up by a 350...
VENDETTA COUPE 5 inch chop. During the process of chopping my coupe or preparing anyway. I searched for others posts here to see what guys had...
The generator in my 62 Merc works fine but it’s only done about 1500 miles since 1981. I’m planning to use it properly. Should I take the geny...
Pretty much rust free; Flathead V8; motor stuck from sitting. $10,000 or best offer. Have more pictures if interested. call Charlie...
59A style short block built with an 8BA block because good 59A blocks are extremely rare. .313 bore x 4" stroke. Offy pistons & rings. Isky MAX...
Flathead v8 transmission with overdrive. 1946 Lincoln 3 Speed transmission with, overdrive in great shape. I bought it several years ago, For a 41...
I know there are quite a few of you guys that have had life long cars. I bought this truck all original when I was 14, dad and I spent the better...
Fully restored, 100% correct gauge cluster for 1940 Ford Truck with three speed transmission. 100 mph Stewart Warner speedometer fully rebuild,...
Available is a Cowl Vent assembly that also fits 1935-6 Ford Truck. No Rust out. $150 Postage will be paid for buyers in the lower 48 States....
Available are various matching sets of California License Plates from 1939, 1940, 1947 and 1951, including two sets of Commercial Plates. There...
o.k. here we go. I know it's a flint engine Jan 13 78 truck 350. Unsure about the c8 J is for Janesville then serial number. [ATTACH]
1934 Ford panel delivery, running, driving, orig gear box, later flathead v8. 17inch wire wheels, new black bias ply tires (5) not mounted. no...
Hello and Thank you for allowing me to join! I recently purchased a Schramm Fordair 60 Air compressor, and for those who are unfamiliar, it is a...
Available is a Chevy Truck Steering wheel in good original shape. Small cracks in two of the arms that will need repair, or run as is. $120...
Looking for someone that lived in area of Wichita, Kansas. There is person that is the market place, selling 34 window molding, but will not ship...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
1940 Ford front brake backing plates modified for 1932-1934 Ford spindles. Includes adapters for the smaller spindle mounting area. $125 plus...
Hello I’m working on a design for a Flathead 8ba and I have a question if anyone has ever ran one with a couple head studs missing. Below I have...
Trying to get the brake drums off my ‘40 Olds. Don’t really want to shell out $150+ dollars for a puller (this is probably my last project). In my...
complete dash with glove box door and gauges 1 cracked glass. $200 plus shipping
Separate names with a comma.
The Jalopy Journal
