I am building a 55 Chevy with a narrowed nine inch ford rear and a four link , need some ideas as to what to use for a hose on the rear housing , mine has threads in the housing to bolt it down , just looking for maybe so ideas as to use for an application so I can order the hose the bracket that is welded to the frame where the hose clipped to is also gone so I need to either buy a bracket or fab one any ideas there would be great also. Thanks Big John
The last one I used was for an 1986 Bronco. It is held to the housing with the threaded vent and is long enough to reach the frame. You'll need to fab a frame mount bracket.