Carb studs needed (3/8 to 5/16 )

Any one know where to get some carb studs that is 3/8 corse and 5/16 fine on the other end?
Thanks Jack in Ga.

 

Have you tried your local parts store?? They should have them or be able to order them..

 

Probably dorman. My fenton tripower has them in it.

 

Will these work ?

http://www.rbssuperchargers.com/Products.cfm?pID=6669

 

or these...

http://catalog.automotivefasteners.com/item/threaded-fasteners-rods-and-studs/studs-2075/675-097

 

check your local Napa. We used to keep these in the drawers at Carquest back in the day too.
Dorman 675-097
3/8-16 one side 5/16-24 on the other, 1 1/4" length

stud page in catalog here
http://www.dormanproducts.com/catalog/hardware2006/355-359_Sec17_Part1.pdf

 

Dorman# 675-097

 

Parts house

 

ACE Hardware

 

did you try Fastenal?

 

I never knew they existed. I made my own once, but I like to make stuff anyway.

Blue