Decent Rattle Bomb Brand?

Has anyone found a rattle bomb paint brand that has a decent spray nozzel that will not clog?

I hate damn spray cans that clog half way through a job or when the can is still full.

 

You are tipping them over every now and then and clearing them out, right? I hear this all the time yet I haven't had but 1 or 2 cans go bad on me ever. Ya gotta shake stuff up forever these days and I always, even in the heat of our summers warm the can in hot water for a good 1/2 hour before spraying. I do like rustoleum's appliance epoxy a bunch.

 

All rustoleum products kick butt! Yea turn can upside down clear the tip out after every use.

 

I want to add that I just bought some rustoelum gloss black that sprayed out nice and laid down so sweetly I couldn't believe it! It is some new formula shit or something. N.N.

 

I used krylon satin on my interior moldings and dash, laid down real nice.

 

go to an aaron brother art and framing or a michaels and buy some graffitti tips. not only are they a high quality tip you can get different widths and patterns, like 8 bucks.


matt

 

ok, I am open up a can of worms here, ever body says rattle can primer is no good, but I saw HOT ROD mag, selling it in there book, what gives ?

 

Who's telling you they are no good? If you follow the instructions on the label, you should be fine.

 

the Hamb, said no good

 

Look above, everyone is saying how to use it.

 

Krylon has a really good fan tip on some cans...

 

Keep the nozzle clean and they all work properly. HRP

 

there are rattle cans that have a fan spray tip-look on can. cans at Pep Boys, etc.

 

I forget which one,but ..rats can't remember.one has a tip on the nozzle that is adjustable (the fan part ).ok some help here......

 

I bought some semi flat black from my bud who has a starter alternator shop. It's made by Seymore. Shook it with the saws all shaker. Never had any paint work that well.

 

ok , a lot of guys on here said the rattle can primer will wrinkle under top coat, I did not make this up,

 

Dupli-color.

 

Ive had a can of Seymore Cast Blast for over 15 years. Painted lots of different things with the same can. Always turned it upside down and sprayed it before putting it back on the shelf.
That reminds me, I need to get some another can or two. Anybody know where I can get some?

And I too like appliance epoxy spray bombs...

 

Hmmmm..... Thanks for the heads up!!

 

Don't ask them about rolling paint on a car either, I'm pretty sure some HAMBers still haven't unwadded their panties....

 

Turning the can over to clear the nozzle wastes propellant and paint.

Instead, simply pull off the nozzle and give it a tiny spritz of brake cleaner.

 

beat me to it

 

Plastikote is by far the best I've ever used.

 

Krylon has the best marbles.

 

Dupli-Color has those... And they do have some great primer paints...

 

Those guys don't know how to prep a surface for painting...

 

That's some good stuff also, but it's hard to find...

 

Here we go again with the marbles...

 

I dig the rustoleum 2x. It goes on nice and even and really works. Don't know how but it's like two cans in one.

 

Being the frugal bastid that I am..here's a tip for ya...When I empty a rattle-can, I always take the tip off and throw them in a lidded glass jar with a little lacquer thinner..
The next time a can clogs up mid-spray, I got a supply of clean tips..

Stan