Register now to get rid of these ads!

Art & Inspiration Candy, Lace, Flake, Flames... wanna see WILD custom paint...

Discussion in 'The Hokey Ass Message Board' started by kustombuilder, Apr 13, 2008.

  1. elspock84
    Joined: Mar 25, 2013
    Posts: 127

    elspock84
    Member
    from waukegan

    color flake i only spray in intercoat. so i can bury it 3 or 4 coats of clear. chrome flake i spray 90% of the time in intercoat clear. since i mix so much flake at one time i get the coverage i want in 2 coats. since i add so much flake clearcoat tends to drip. :D . now this is the way i do it not the same as everyone else but its my way.
     
  2. IRISH13
    Joined: Oct 19, 2010
    Posts: 71

    IRISH13
    Member
    from SoCal

    Nice work! I could look at this stuff all day..
     
  3. 30FordNerd
    Joined: Oct 5, 2012
    Posts: 274

    30FordNerd
    Member

    Dose this model count that i built. it has a chrome paint job and kinda hard to paint to. And some other wild paint jobs.
     

    Attached Files:

  4. pbr40
    Joined: Aug 10, 2008
    Posts: 874

    pbr40
    Member
    from NW Indiana

    Elspock84 thanks for the insight. I didn't have much luck putting it in the clear so I bought one of those flake busters and that wasn't much better
     
  5. elspock84
    Joined: Mar 25, 2013
    Posts: 127

    elspock84
    Member
    from waukegan

    flake busters fucking suck! waste of flake and money. this is the only gun i use for flake. ive had the same one for about 2 yrs now :) never clogs unless you over do it wit the flake (guilty) but for 40 bucks the best flake gun out there for me . roth has their "flake bomber gun" its a fucking china gun wit a sticker for 130. dont get suckered like me for that shit.

    http://www.ebay.com/itm/New-2-5mm-H..._Automotive_Tools&hash=item20d15e48b6&vxp=mtr
     
  6. pbr40
    Joined: Aug 10, 2008
    Posts: 874

    pbr40
    Member
    from NW Indiana

    Elspock84 that's great info!!!! I use the same gun for feather fill but ill have get another! Thanks for the help
     
  7. elspock84
    Joined: Mar 25, 2013
    Posts: 127

    elspock84
    Member
    from waukegan

    no problem :)
     
  8. Mattimus
    Joined: Mar 18, 2004
    Posts: 157

    Mattimus
    Member

    I picked up this gas can from a thrift shop so I could practice painting. Here is what I finished last week. Will be striped up at a later time.

    [​IMG]
     
  9. enloe
    Joined: May 10, 2006
    Posts: 9,537

    enloe
    Member
    from east , tn.

  10. LeoH
    Joined: Nov 4, 2011
    Posts: 462

    LeoH
    Member
    from Reno, NV

    Very nice. I can't say I remember ever seeing someone trick out their gas can. You could be a trendsetter!
     
  11. The Gas Monkey Garage gasser. Its got 4 pounds of flake!
    [​IMG]
     
  12. Mr.Dickies
    Joined: Jan 23, 2007
    Posts: 664

    Mr.Dickies
    Member

    elspock84
    Would you know what my problem with this window trim is? I can't say why? I have flaked a bunch of stuff but not an expert for sure. Just looking to not have it happen again. Its weird it's not all over just in certain spots. The heaterbox it more all over but trim pieces are just in spots and no reasoing where. I was thinking I didn't wait long enough for inter clear whats your thoughts? Thank you
    IMG_1534.JPG
     
  13. Mr.Dickies
    Joined: Jan 23, 2007
    Posts: 664

    Mr.Dickies
    Member

    Here's what puzzles me. Same pieces done right next to each other. Same everything. One bubbled one nothing.
    IMG_1540.JPG
     
  14. niceguyede
    Joined: Jan 19, 2009
    Posts: 633

    niceguyede
    Member
    from dallas

    A friend I work with just got an iwata 3.5 for spraying poly fill, or feather fill whatever you want to call it...super thick stuff that comes out like ceiling popcorn if you use a regular paint gun. It works like a champ for that stuff, so I figure it would be great for flakin. Its about 130, but its an iwata, really good paint guns and airbrushes for the money


    Sent from my DROID device using the TJJ mobile app
     
  15. 58 Delpala
    Joined: Sep 25, 2009
    Posts: 334

    58 Delpala
    Member
    from NC

    That looks like some kind of solvent got onto or under the paint. Yes it is possible you didnt wait long enough before the intercoat. Also possible that you didnt sand enough for good adhesion or didnt wipe it off good enough after sanding the primer. It is also possible the primer had not cured enough and was extra thick on that spot but more likely is the first. Only fix is to sand it off and start over.
     
  16. elspock84
    Joined: Mar 25, 2013
    Posts: 127

    elspock84
    Member
    from waukegan

    that shit just happened to me on a car i just layed some flake patterns on. only one spot on da whole car it lifted up on. i blamed it on da painter only adding 2 coats of clear. did you spray the flake over a regular base or over a base that had been cleared before? if it was over a base wit no clear than im gonna agree wit delpalas statement.
     
  17. Mr.Dickies
    Joined: Jan 23, 2007
    Posts: 664

    Mr.Dickies
    Member

    Had 3 coats of clear over the base. I think it was not enough time after clear. I'll try again this week. such is life.
     
  18. elspock84
    Joined: Mar 25, 2013
    Posts: 127

    elspock84
    Member
    from waukegan

    hmmm how long did the clear dry?
     
  19. Mr.Dickies
    Joined: Jan 23, 2007
    Posts: 664

    Mr.Dickies
    Member

    About 24 hours. 5hrs in the sun.
     
  20. porsche930dude
    Joined: Jan 5, 2008
    Posts: 274

    porsche930dude
    Member

  21. elspock84
    Joined: Mar 25, 2013
    Posts: 127

    elspock84
    Member
    from waukegan

    seat trim off an old chrysler :) still need to clear but yaw get the idea.

    [​IMG]
    [​IMG]
    [​IMG]
     
  22. TimGood
    Joined: Mar 22, 2010
    Posts: 26

    TimGood
    Member
    from SoCal

    Here are some pictures from last year and the process of my roof and one of my dash.
     

    Attached Files:

  23. elspock84
    Joined: Mar 25, 2013
    Posts: 127

    elspock84
    Member
    from waukegan

    did this guitar last night also.

    [​IMG]
    [​IMG]
     
  24. The dash I did this weekend for my 59 Edsel. Still needs clear.
     

    Attached Files:

  25. AHotRod
    Joined: Jul 27, 2001
    Posts: 12,216

    AHotRod
    Member

    That Edsel dash is beautiful !
     
  26. elspock84
    Joined: Mar 25, 2013
    Posts: 127

    elspock84
    Member
    from waukegan

  27. niceguyede
    Joined: Jan 19, 2009
    Posts: 633

    niceguyede
    Member
    from dallas

    A sneak preview of my roof in progress

    Sent from my DROID device using the TJJ mobile app
     

    Attached Files:

  28. Nice! When do we get to see the whole enchilada?
     
  29. niceguyede
    Joined: Jan 19, 2009
    Posts: 633

    niceguyede
    Member
    from dallas

    As soon as its finished



    Sent from my DROID device using the TJJ mobile app
     
  30. elspock84
    Joined: Mar 25, 2013
    Posts: 127

    elspock84
    Member
    from waukegan

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.