Can anybody tell me if they know where I can purchase the small bolt that attaches to the carby and allows the indent cable to hook on to it. I've had one where it came complete in a kit, but now I need just the bolt. I've considered trying to machine one on a small lathe but first thought I'd ask the audience.
OK, I need the bolt that connects to the TV cable then. I emailed Bowtie some time back and was told not available. I have also so approached a couple of auto tranny suppliers with no luck.
I think Holley makes what you need http://www.holley.com/types/Throttle%20Linkage%20Bracketry.asp Then see if Summit carries it.
I'm confused, do you need the bracket that the TV cable bolts to the manifold with? You do not appear to have anything to hold the cable in position. In your second picture you show the cable hooked to the carb with a piece that has a screw through it. Is that what you are talking about? I don't see how that could attach to the carb. Maybe you could sketch what you need. I have lots of spare Q-jet parts and might have what you need. Is your cable kit from Lokar? Maybe they have what you need. They are good folks to deal with.
Is this what your looking for?? http://www.summitracing.com/parts/edl-8018?seid=google&gclid=CLyZ66CQnbYCFQYFnQodpUYAOw
This here's the Lokar TV cable/carb mounting bracket: http://www.summitracing.com/parts/lok-srk-4000 Is that what'cha need?
I called Lokar in TN and they mailing me 2. The Edelbrock and Summit items are possibly the same I'm not 100% sure but I'll go with the Lokar ones for now. I will know for sure once the mail man delivers them. Thanks everybody.