International king pin help!!!

Got a set of international spindlesoff of an old dirt b modified that i am looking for a set of king pins for. Best i can tell, the diameter pin i need is .988 and should be 6" long. Can anyone give me a part number on a set this size or tell me what this size pin is off of. Someone told me they were off a international 454 tractor with a 2400b front end. Have tried to find a king pin set for this but haven't had any luck.

Please help!!!

 

Would take a used set if anyone has any.

 

try www.oldihc.org and ask around there. helpful folks

 

Check the vintage sprint car thread here on the HAMB. The first few Sprint cars I worked on used them in the early 90's.

Bob

 

Look at the bottom of this page. Does not give a length, but I see a lot of hollow .988 king pins on many race car sites:
http://www.bicknellracingproducts.com/pdf/2007/03Spindles.pdf