So who has the most bad ass mill on the Hamb

Geez...................some bad ass motors. Whose drinks the most gas? Just kidding

 

Heres' my mill

 

I had one of those out in CA. I think it was a Sum Dum Fuk. Or was that me for buying it...?

 

"That's the baddest ass bad ass mill in badassville"

 

Here's mine . Looks badass , but havent run it yet so it might not be , but I think it will be acceptable . 8/71 blown 354 .

 

Its not what you'd call a precision machine. I cancelled my contract to make sprockets for Rolex watches.

 

Oh yeah...here's mine.

480" (4.500 X 3.76), Merlin III, 6 1/2" Carillos, Venolia 15:1s, Dart 320s by Giannino, Summers front mag drive, Reed roller 4/4 (15736842 firing order),1969 Crower stack injection.

905hp @ 7800 & 748lb/ft @ 6200. It gets the job done...

 

How about this. It is 2 V12 BMW's going in a 57 Chev. 2dr. post.

 

I guess the caddy 500 (519ci) mill that was in the model A saltracer was quite hairy

The Model A salty Box Racing sedan has a tall deck 496 chevy in it now with the same blower and injector hat as the caddy had.We havn't ran the 496 in anger yet!

 

I like it. That BMW V12 has sort of an Allison V-1710 vibe going.

Piper106

 

.030 over 440, under .600 lift flat tappet cam, 11-1 CR 600+HP

 

so many nice mills here and that,s also the sbc,s i just can,t see how anyone could call them boreing unless they just don,t understand

 

Dill,,,, Do you mean this M/T Hemi??? Its a video, click on the picture & turn up the volume!!!



Or this Nitro FED???

 

needs a unicorn in the back ground.

 

eddies chop shop.2000hp lsx.his car is pretty freakin sweet

 

I'm guessing that even though you clearly stated "nambla loving shat box chubby deep throat double gager engines are exempt",
- that by popular bag licking vote, 'the baddest engine' will still end up being an oil burning cam lobe eating self destructive planned obsolescence general moaners 3rd place shat block chubby that to this very day continues to garner absolutely Z-E-R-O respect in any and all international racing circles and/or sanctioning bodies throughout and not limited to the 1950's, 1960's, 1970's, 1980's, 1990', and right on up through the turn of the century and even quit possibly into the next afterbirth (ala Car and backdoor Driver/Shovey Lover magazine).










.






.

 

I've been following Eddies Build , Fkn Rad !

 

I thought this was the HAMB, not Car Craft.

 

RE: So who has the baddest ass mill ?

Again! What is wrong with the Small Block Chevy. It still rules the aftermarket high performance industry. It has been reconfigured and has been pushed to every extreme.
Maybe there should be categories like aspirated and non aspirated.
Weight to cu in would be interesting categories.
As it is, the topic is too general. There is great activism, however.
II don't know if this is a bad ass mill but it is rare.

 

"the Small Block Chevy. It still rules the aftermarket high performance industry"

- only because it needed the aftermarket industry to keep up with everybody else...

 

Can we get back to pictures of modified engines before this gets shut down?

 

Holy!!! Do you have more info about this build?

 

This post illustrates perfectly the strength of the big block Ford engine combination. I've said it before I'll say it again..... The most horsepower per dollar you can get with factory parts bar none.

 

A BMW V-12 with Holley 4 barrels? Just doesn't cut it.......no way should that engine have anything other than injection.

 

Not that the FlatCad Bonneville race team is biased, self-promoting or anything like that

But . . . we think this one is a contender - started out as a 'traditional' 1940 Cadillac Flathead V8 . . . we just 'tweaked' it a little



Conservative Dyno Tune:

366 cubes, 575 horsepower at 5500 rpm on gas . . .

Come see us at Speedweek 2012, August 11 - 17

 

Thats pretty damned impressive.

 

http://youtu.be/QF8wPTUXxnw

I'll throw Tommy's homemade 4-cam nitro burning hemi on the pile...

 

all nice engines indeed.

 

Not even close to being mine... but who could resist the Pure Hell AA/FA doing a cackle up!!! http://www.youtube.com/watch?v=VG3rxf7XQL0&feature=related