Please help has anyone done a granada brake swap on a falcon

I have a 64 falcon that i am building for a trip down route 66 so i put granada spindles and brakes on it now i have run into a problem with my tie rod ends the falcons tie rod is to small for the granda spindle and the threads are to big on granada tie rods

 

Read through the Doing Falcons Right thread.
If your answer is not already posted, ask it there. These guys know Falcons!

http://www.jalopyjournal.com/forum/showthread.php?t=281142

 

I put the Granada spindle and brake set up on a 65 Mustang and the Granada tie rod ends fit the Mustang tie rods. Maybe you could use Mustang tie rods.

 

Make a shim out of a beer can to space the tie rod end up to size. Caution you MUST use a steel beer can !

 

I did this years ago to a Fairlane but forgot what I did about the tie rods. I think I changed them also to match the Granada rod ends.

 

try searching www.tffn.net

It's been done a million times. I did it on my 63 sprint 'vert and the stock tie rods fit just fine, but it was a V8. If you have a 6 cyl there are solutions.

 

I think what you will need are the tie rod ends shown on this page:
http://www.mustangsplus.com/tech/granada/index.html