87 Monte 4 link pics under 54 chevy

I got a rear end from a 87 Monte Carlo SS and noticed that it's a factory 4 link, I read that I would need to fab some brackets to hold the lower control bars, and a crossmember for the short upper ones. but does anyone have any pics of this setup under their ride? I will be bagging the car

Thanks in advance
Omar

 

I grafted the monte frame with arms, crossmember, and all onto mine. If I could get under it to take a pic I would, sorry.
It might be cheaper/easier to just order a universal weld-on 4link kit and go from there. Some junkyards don't like it when you're wanting to cut stuff off of frames...

 

I have the complete car, and thanks for the reply


Sent from my iPhone 5 using TJJ

 

my build page will show you the chassis i put the whole thing under my 47

 

I saved these a while back. I got them off of this site.

 

I would say use the whole ass section of The monti carlo. Look in my albums at my truck and my Nash. both are running g body front and rear sections

 

Here ya go

 

Perfect! thanks!