where to buy lowering blocks 1 3/4 wide

I can't find a company where I can order 1 3/4 wide (it's a 52 plymouth) and the best woud be 4 inch tall (would take 3inch too)
please help me out

 

Go to your local metal dealer.
buy the right sized metal stock and make them yourself.
that's what I did for my '54 Chevy (also 1.75" width leaves).
r

 

I have a pair that are 4" high and set up for 2" shackles, $40 incl. shipping parcel post.

31acoupe

 

WWW.RODNCUSTOM.COM SHIPPED FREE IF YOU ARE AN ALLIANCE MEMBER

 

Bunk link tcurrier.

 

That's what I would do, make them out of rectangle tubing. The cast aluminum blocks crack.

 

I use whatever I have on the cut-off rack leftover from paying jobs. Rectanglar tubing works. The last set I made for someone was from aluminum bar stock, that shit will never crack.

Bob

 

I have a set that are 2X3 off a 1940 Chevrolet. if interested PM back.
Bob,

 

Try Jamco Suspension, good guys, I got my 3 inch chevy blocks from them...they were 1 3/4.

 

Chassie Engineering has them

 

Chassis Engineering has them too....

www.chassisengineeringinc.com