Just wanting to know if anyone was running a Fluidamper on a 292 inline, if so what did you do about the damper pulley, as the original balancer has a V groove cut into it for the belt Thanks
Hello, my name is Ivan and I work for Fluidampr. What many engine builders will do in your situation is either attach pulleys from a V8 application to the Fluidampr in order to run accessories or look into aftermarket pulleys that have a V-Belt that will mount to the 3 bolt pattern on the Fluidampr. The Bolt Cicle Diameter for mounting pulleys on all SBC Fluidamprs is 3.200" and uses 3/8"-24 bolts. Please let me know if you have any other questions.
I used a Fluiddampr on a Chevy six on a circle track car , worked good Sbc one I think we just had to shorten the snout (spl) .Good Luck