anyone run an Isky z-25 SBC?

The engine is a 350, 10:1 compression, 2g 3x2. The vehicle is a bare bones 36 Ford truck with a 5 speed, 3.70 rear end, and 29" tire. I havn't decided on exhaust yet, either lake headers or speedway rams horns. Does this cam have a good sound but still streatable with my combo?

thanks

 

Do you have cam specs. to share ?

 

oops: 278 advertized, [email protected], .480 lift, 108 lobe seperation

 

That Isky is a a solid lifter cam. I'm running a hyd. cam with about the same specs, and it is very streetable and has a nice little "lope" to it.

 

I've got a Z-25 in a 327" that's in my '32 5w . Tremec 5 speed , 4.56 Detroit Trutrack rear with 29" tire height . Really like it , about 6,000 miles so far . Engine looks stock with ram horns , AFB and '64 Corvette air cleaner . I take it to 7,500 RPM often .......

 

How much compression? Old post, bla,bla...

 

Thanks for the pm 32 barn car,I pulled the trigger on one for my 283. corvette valve covers, so I needed an older gentler lobe that would work with lighter springs and stock rockers, 11/1 283 with 4.11's the isky looks like a decent choice and has a relatively narrow LSA which I generally prefer.