Anywere I can find these? Please contact me if you have somewhere to get a drawing of these frames. Thanks!
I believe that coupes and sedans used the same frame. But the Pontiac wheel base was 6 inches longer than the Chev. I should get one for my Pontiac.
General dimensions to build off of is what I am looking for really. I don't have my poncho here to take measurements off of, so having the stock dimensions would be awesome.
Looks like my project without doors. I have access to fenders, but I don't know what I'd do with them.
East Troy is only 20 minutes south of me....if your in the area, feel free to stop by and take the measurements you need
Its a 128" wheel base , im quite sure of. My chassis was extended to the 32 wheel base dimension. Lets see a picture of your cafe racer
Old one.... Another one... Current state of the above..... did a lot of framework and stuff, upgraded suspension, etc. So there you have it. Thanks for the info on the frame BTW. I'm thinking I will try to catch up with PBR and grab some pics/measurements.
sheet....Pewaukee's a hop, skip, and jump away. Plus your really close to the Kilti. I'm about 15 minutes east of Pewaukee off I-95. Grew up in that area.... PM me and i'll get you my # and directions.... also don't listen to MR Jeffery....i'm kinda sweet on him....
Got a '31 chebbie.....virgin. What measurements u need? Koo. I rather push my Chevy than drive a Ford. LOL. All good.