Register now to get rid of these ads!

Roof off '40 Ford Sedan???

Discussion in 'The Hokey Ass Message Board' started by BZNSRAT, Dec 22, 2008.

  1. BZNSRAT
    Joined: May 30, 2007
    Posts: 710

    BZNSRAT
    Member

    I may have an opportunity to grab a real rough 39/40 Ford 4 door sedan. I'm not big on 4 doors, but I am thinking it would be cool with the top off. I know it would need tons of bracing etc.,...thoughts???

    Also, I know there is at least 1 HAMB'r I have seen with a similar car. If y'all know of any pics of this car or other sedans with the top-off treatment, post away...Thanks for the help!
     
  2. Jethro
    Joined: Mar 5, 2001
    Posts: 1,909

    Jethro
    ALLIANCE MEMBER

    I think it was Brewsir that did a 39 merc 4 door.....one of my favorites!
     
  3. HRK-hotrods
    Joined: Sep 26, 2007
    Posts: 922

    HRK-hotrods
    Member

    Member sawzall did it to his...
     
  4. 49ratfink
    Joined: Feb 8, 2004
    Posts: 18,853

    49ratfink
    Member
    from California

    9 times out of 10 when someone cuts the roof off a 4 door it looks like crap.
     

  5. I have the replacement roof ya' need.

    Think about it before ya' cut yours off.

    I'm in SC.


     
  6. 36tbird
    Joined: Feb 1, 2005
    Posts: 1,143

    36tbird
    Member

    I've got a replacement '40 4 dr. roof in my back yard, too! Wow, they're everywhere! Seriously, if you cut off the old roof, save it. There are some valuable compound curved panels and drip rails that someone might need. Don't forget to harvest the inside trim around the windows as they are sought after. I kept this roof to replace the rear door panel on my '40 sedan delivery if needed.
     
  7. That 4-dr roof is the same as a 2-dr. That's why I kept mine.

     
  8. brewsir
    Joined: Mar 4, 2001
    Posts: 3,278

    brewsir
    Member

    I built my 40 merc 4 dr...didn't like it as a slammed 4 dr so off with the top and then converted it to 2 doors...didn't like the trunk so it got leaned forward some at the top....hell of a lot of work and no I didn't add any bracing to the frame...just make sure the floor and body mounts are in great shape.
    I used parts of the roof to fill the top on a F1 when we chopped it...nice shape.
     
  9. HRK-hotrods
    Joined: Sep 26, 2007
    Posts: 922

    HRK-hotrods
    Member


    If it's hacked I would agree. You need to finish the header, roll the tops of the doors and cap the rear section. I have seen a couple that turned out really nice... Shit, the one in my avatar may be losing it's lid someday.;)
     
  10. BZNSRAT
    Joined: May 30, 2007
    Posts: 710

    BZNSRAT
    Member

    Thanks guys..

    The one I am thinking of sports a toneau cover...anyone remember this one?
     
  11. BZNSRAT
    Joined: May 30, 2007
    Posts: 710

    BZNSRAT
    Member

    Finally found the one I was lookin' for...
     

    Attached Files:

  12. PurplePearl50
    Joined: Aug 1, 2007
    Posts: 816

    PurplePearl50
    Member
    from Sedalia,Mo


    That looks sooooo good I say cut it off!
     
  13. sawzall
    Joined: Jul 15, 2002
    Posts: 4,725

    sawzall
    Member

  14. modrod
    Joined: Dec 18, 2008
    Posts: 46

    modrod
    Member

    I also have a roof section from a mid 40's ford if anyone needs one for a chop project or something. It came off a 2-door 46'. You need one, give me a hollar, I'm in the south.
     
  15. Sawsall and brewsirs cars are HAMB legends................
     

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.