So are you thrashing over the 3 day weekend?

I plan on running duct work for the furnace in my garage, plus setting up the air lines for my compresser.

 

Was going to start changing the rear end in my 32 BUT I may have made a mistake ...

 

Fitting windshield post to cowl,hook up throttle cable and pedal.If I get brave cut 5 inches out of my bed.

 

My T bucket might be legal by Friday. If so, I'm thrashing the roads in my general area.

Shhhhhhhhhh........ I'm hunting ricers.

 

I think I found another greenbriar for sale. It was dark and about 45 mph.....I'll look for the cragars though.

 

Going to be guiding flatlanders around the Black Hills on Mountainbikes www.bhfattirefestival.com I am in charge of the ride leader volunteers. Lots of beer will be consumed as will miles of singletrack!

 

Is your mountain bike vintage? (wide whites,moon disks,Q/C, W motor)

 

skatin and mabey a local car show if their is one

 

I am going to put together the Rambler 196 OHV motor I have been collecting parts for all winter. If all goes well should be driving the Rambler by Sunday.

 

Saturday I turn gooey liquids and fabric made of glass into the back half of a T tub, do a little horse trading for some engines, fix the brakes on my boat trailer, maybe go see DV8's newest acquisitions and see if he has a beer I can borrow. But first. have to get my schoolwork done, hence the 1:00 am post.

 

Going to Pasa Mario

 

Dang....I hafta get my bike back out and ride off some of this fat......

 

No thrash. Going to the Hoosier 100 Friday (please no rain), Little 500 Saturday and 500 Sunday. Recovery on Monday.

 

Need to finish workbench in the shop and continue running wire out there, no wife or kids around this weekend should get a lot done.

 

Cleaning a bunch of car parts out of my neighbor's dad's back yard Saturday and then trying to get my Merc off of it's jack stands the next three days (took Tuesday off too). I've got all my parts, I just need to get it done.

 

going to the 500 Sunday, if I can catch an earlier flight Saturday I might catch up with Jusjunk at the Little 500.

 

Going to try and get the motor back in the kids 54 Chevy if all goes well. He is ambitious and I have a cooler full of beer so we should be good.

 

Sorry Ben, but I've never channeled a floor so I get to learn on his dime

 

Gonna try & finish moving 10 pounds of stuff into a 5 pound shop

Pressure wash the motor & frame, in preparation to pull & re-seal the motor in the shortbed.
If the springs show, i'll be setting them up in the 56. Possible late bbq sunday night.

Monday is the dead animal flesh roastathon in Bluffdale, followed by the trip to Mt Olivet monday 'bout 6

A tip of the hat, and a minute or three of silence to my Pop, My cousin Al, and all of those that made the American Dream a little easier for me

 

working on the property trying to get it ready for my wedding in October.

I will take some time out to attend Chris 50s bbq on Sunday.

If I fly there solo I might break out the hot rod and take it for a spin...

like FatHack said... everyone have fun and stay safe!

 

The 65 is going to look like a new machine on Tuesday.
Getting it ready for primer, all except for body work. And putting on some stainless discs.

Free beer if anyones interested. Out in Picture Rocks AZ.

 

Been putting off progress on the chevy for this reason or that, but I'm off early today and gonna start blasting the body, for me, putting the body together is the biggest challenge. I guess that's why I have been putting it off. no more excuses though

 

I'm going to make the oil company's richer. i will leave today and fill up my boat with over priced gas and get it wet. clear out the mind and get a fresh start on my 32 next week

 

yea, i've got a list...

finish wiring, new front springs, install back glass, re-set/check timing, tune carb, finish exhaust.

damn, haven't even started and i'm already tired...

 

Hey Trent, sounds like fun. I dusted off the Trek MB the other day and think I am going to start commuting with it. Gotta change out the presta valves for schrader so I can air up with the compressor.
Is it bad when you get winded pumping up your tires? LOL

Car related stuff would be cleaning up the T ( not done since Dewey ) and grinding some more of the bracket scabs off my narrowed '57 Olds rear housing.

 

You need to be all over that my young friend. Take pics and put together a tech for the folks who are thinking impaired.

 

I have to work on my non HAMB friendly 67 gto. stupid late sixties cars....

 

Going to Cali for the week, so only thrashing will be in the pool!

Congrats on the graduation Porknbeaner!

 

Thanks friend.

I guess 54 isn't too old to make a fresh start.

 

gonna try to tune on the truck a little and work on my motorcycle.