Well me and Luckys8ba started working on the air ride today , We got the bed pulled out and started working on the c-notch , this baby will be draggin , Cant wait !!!! I also went and put smaller tires on it so I can get the clearance in the wheel wells had some COKER bias BWW @ 30 1/2 and know went to a 205/70/15, that alone dropped it 3 inches, Not to knock down bias tires, but what a difference in the ride, alot easier to handle !!!!!!!!!!! more pics to come as project moves along !!! click on link to see some pics......link updated 08/13/07 http://good-times.webshots.com/slideshow/559973855vjPwdB
UPDATED PICTURES........................ http://good-times.webshots.com/album/559973855vjPwdB Well me and Luckys8ba are getting closer, you always hope or think that its going to be a weekend Job, YEA RIGHT !!!! LOL............ well we are working on the front know and took off the lower control arms and cut out the bottom area that held those old ass rusty heated springs and welded some fresh 1/4" plate in its place so I can get those 2600 air bags in place without touching the sides (air bags were to fat to fit in the original cup for the springs)... Just finished all that up and know to throw them back together . Well maybe a few more 4 hour days here and there and I will be ready to wire this beast up .......Thanks for checking it out !!!!!!!!!!
WELL It was alot of work , and a big thank you to luckys8ba, for putting up with me !!!! What a total difference in apperance and ride ..................... BEFORE PIC AFTER.....Click on link http://good-times.webshots.com/slideshow/559973855vjPwdB