Posting to see if anyone has a part number or has ideas for a "modern" ignition switch (Off, assessory, start) that will fit in a stock Model A dash panel. The ones I got are too large and don't fit in the gas tank cavity. I'm using the cowl tank so cutting the tank is not an option. If there aren't any available, I'm considering using a momentary switch under the seat riser to use as the start function. Thanks,
This may be what you are looking for. https://www.nurex.com/pop-out-look-alike-ignition-switch-with-accessory-terminal https://www.nurex.com/not-all-ignition-switches-are-the-same
Denis, Thank you. I think Cole Herse (sp?) may have one that will fit. I didn't think to go to a parts store to look. Patterg2003, I saw those this AM. I'm going to call because I want one that has start and then returns to ignition position.
I use a fairly stock looking "A" dash in my 28A hotrod.. To get the room I needed,for a number of things,I gutted the inside of gas tank. Also gutted out the back behind center "A"dash. So room for a universal key switch
Look up one for marine use. Don't know if these are shallow enough. Cole Hersee 4 position with key: Acc 10a Ign 10a Start 5a 956-4100 4 blade terminals 1"- 24 bushing 956-4104 4 screw terminal 1"-24 bushing 956-4154 5 screw terminal 3/4"-24 bushing with ground terminal 956-4304 4 screw terminal 3/4"-24 bushing 956-4311 4 blade terminal 3/4"-24 bushing 956-4704 4 screw terminal 7/8"-24 bushing HD Acc 20a Ign 20a Start 10a 956-4138 4 blade terminal 1"-24 bushing
I'm going with a keyed on/off switch with a start button either on the dash or on the dash/vent panel. Here's my friends '30: