Register now to get rid of these ads!

Projects Progress Again Finally on my '49 Ford

Discussion in 'The Hokey Ass Message Board' started by Hdonlybob, Jun 26, 2021.

  1. Hdonlybob
    Joined: Feb 1, 2005
    Posts: 4,115

    Hdonlybob
    Member

    Well, it has been a while since I have posted on here....being (77) years old, and somewhat handicapped I have spent the last four or five weeks with a horrible back that totally kept me out of the shop. :(
    However, I am back in again, and doing fine as long as I work off of my three wheeled handicap scooter...just the right height and no getting up and down. (OK done whining)
    Need to finish the brake lines, then pretty well done with the underside.
    Sooo, after the ~4th or so trial at a different front end, I finally have a winner that I like.
    It is only mocked up at this point, and a lot of filling in and body work to go.
    Basically a '62 Caddy front bumper narrowed ~(8)" to fit, '54 Merc Bullets, a '50 Merc grille, and '54 Ford headlight rings that I will French in.
    The grill was missing several teeth when I got it, so have been making new ones as I go along.
    The last two pictures show my "Dentist" work on the first grille tooth. Several more done now.
     

    Attached Files:

    Ford52PU and jaracer like this.
  2. 0NE BAD 51 MERC
    Joined: Nov 12, 2010
    Posts: 1,785

    0NE BAD 51 MERC
    Member

    Nice work. I could have saved you some work, I got a beat up grill hanging in the shop as wall art! lol But you got it under control and I find many times fabricating a missing part is the most enjoyable part of the project. Larry
     
  3. belair
    Joined: Jul 10, 2006
    Posts: 9,015

    belair
    Member

    Looks good. Has a Buick vibe to me. A little progress every day. 49 Fords are one and f my favorites.
     

  4. Hdonlybob
    Joined: Feb 1, 2005
    Posts: 4,115

    Hdonlybob
    Member

    Yes it does, or as one fellow posted on a different forum, kinda reminded him of this: [​IMG]
     
    impala4speed and '28phonebooth like this.
  5. Jalopy Joker
    Joined: Sep 3, 2006
    Posts: 31,262

    Jalopy Joker
    Member

    as long as you feel good about your progress is all that counts
     
  6. Rickybop
    Joined: May 23, 2008
    Posts: 9,679

    Rickybop
    ALLIANCE MEMBER

    77. Progress.
    Thanks for the inspiration, Bob.

    Concerning the young lady...
    I almost never say this, but...
    Hummina hummina hummina.
    Those... those... EYES!
     
  7. Rickybop
    Joined: May 23, 2008
    Posts: 9,679

    Rickybop
    ALLIANCE MEMBER

    Or as my Grandpa would say...
    ( he was a pull my finger kind of guy)
    "Couple of good spare tires there."
     
  8. AGELE55
    Joined: Jan 4, 2018
    Posts: 623

    AGELE55
    Member

    Nice work Bob. You’re guilting me into getting off the couch...
     
  9. Guy Patterson
    Joined: Nov 27, 2020
    Posts: 372

    Guy Patterson

    Like the welder see you are running on 120. I run mine on 240 but they are nice machines
     
  10. Hdonlybob
    Joined: Feb 1, 2005
    Posts: 4,115

    Hdonlybob
    Member

    Thanks, I use it for tacking stuff in place.
    I have a large Miller 220 welder for the tuff stuff..
     
  11. belair
    Joined: Jul 10, 2006
    Posts: 9,015

    belair
    Member

    @Rickybop - "you'll put your eye out, kid."
     
  12. Hdonlybob
    Joined: Feb 1, 2005
    Posts: 4,115

    Hdonlybob
    Member

    Thanks for all the kind words..
    I should clarify, I can walk, but not very far, so am not confined to my scooter..
    Also here is my '63 Biscayne I built ~11 years ago when I could still kneel on the concrete, as well as lay under a car :) Still driving and loving it
     

    Attached Files:

    AGELE55 likes this.
  13. Good to see you still at it Bob. I hope to see the 49 up close one day , like the days of bench racing in Jims garage.
    Maybe , if the right project comes along I'll jump back in . I just got really busy with my woodworking and Grand Kids. Good to see you back on the forum.


    Don (oldschool66)
     
    Hdonlybob and Max Gearhead like this.

Share This Page

Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.