Hot Rods Upper hose ‘32 Ford/SBC

I’ve searched the forum without luck. I’m looking for an upper radiator hose for a SBC with a forward angle thermostat housing to a Walker radiator with the inlet on the driver’s side (1-1/2” both ends). It’s getting harder and harder to find an auto parts store that will allow you to look for one. If anyone has a part number (or vehicle application) I’d appreciate the info. I can trim to fit, no problem.

 

I found this one. Sorry do not have the truck any longer and did not record the hose #.
They are out there. Carquest here has been a great help to me in going the extra mile in finding what I needed.

 

Here is one possibility:
https://www.est1946.com/search.aspx?find=162200

More info here:
https://www.jalopyjournal.com/forum...diator-hoses-in-32-ford-with-sb-chevy.373252/

 

I’ve used tri five Chevy upper V8 1955-7

 

Depending on angle of thermostat neck (straight up or slightly angled to clear larger air cleaners), I’ve used aftermarket versions of these hoses.



Cheers.

 

This might work, could you take some measurements so that I could compare them?

 

google search, use Hamb with key words, - found this in less than a minute:
https://www.jalopyjournal.com/forum/threads/32-ford-sbc-radiator-hoses.721403/

 

or this type of thing....

 

@catdad49, that might work. Do you have a P/N or application for that hose? If you do I can look up shape and dimensions online. Thanks

@clem, I’ve already searched that thread. None of the posts really apply to my situation. Thanks.

 

Yes, Dayco 72072.

 

Thanks @catdad49. I’ll check it out.