Technical Multi Carb Setups -Let's see 'em!

Here is a couple for my v8 60 hp .An original Eddie Myers and an Edlebrock .
Have the Eddie Myers heads as well ,so up in the air which intake to use , the early chev air cleaners as well . Pairs of 81's as well .

 

97[/ATTACH] An early 216 Nicson intake cast in L.A. Old ad has them painted RED !!! Pair of Chevrolet factory black Carter W-1s, note the C in the castings... Again one of my favorites... dyno dave

 

Holley 94's on Offenhauser intake that I recently picked up from a fellow Hamber. I can't wait to get it on my 289 in my T roadster.

 

A never installed N.O.S dual carb Offenhauser , not the common #1035 manifold. This one was factory finished in the blue, and the rib tops were polished and cast-in part number is 1035-K...Thinking it may have been a custom order or a display piece...Owned it once, didn't remember it, brought it again, detailed the set-up and sold it again. dyno dave

 

.

Sent from my SAMSUNG-SM-G920A using The H.A.M.B. mobile app

 

.

Sent from my SAMSUNG-SM-G920A using The H.A.M.B. mobile app

 

Been running these in different cars since 1970. They work decent as long as I idle above 1000rpm otherwise idle gets finicky. Been thinking about going to a 4 bbl carter carb (getting tired of dealing with Holleys; leaking ,warped metering blocks, etc). My problem is Holleys just look right and nothing looks better than 3-2's.

 

996CC2A1-E2BA-4B31-8FF3-03F7B5366C54 by KFC posted Mar 23, 2021 at 3:50 PM

 

Gorgeous engine. Can’t quite tell from the photo..... is that metalflake?


Sent from my iPhone using The H.A.M.B. mobile app