Trying to figure out what to do with the visor and top. Plan is to weld on the visor and spot weld in the insert. The top will be covered like a 1930/31 with cloth in the center only. Should I leave this raised bead on the visor? Will the 30/31 front trim cover the gap on the side. This area on a 29 is a little crude.
Roof panel tack welded in a seam sealed, ready to be covered. Visor mounted. A little touch up filler and sanding still required on the body and hood. Might add a roll bar? A little tight for exhaust with the ram horns, I might have to use 1955 265 manifolds.