I remember that progressive die roller thread and thought it was good craftsmanship.And don't any of you good crafters drag-up ya gots to much knowledge to impart here and many appreciate it. Webb
i repaired my rain gutter on a 40 coupe. i shaped the repair area with a 3/8 fuel line,then split it with a thin cut off wheel. tavked it to the body with a mig, ground the weld down and added more strength with jb weld
I had some pin holes in my '41 gutters and I ground them out and filled with AllMetal. lasted 25 yrs until we sold it. no signs of deterioration