Looking to throw sparks, sitting low. leaving the lowering springs goodbye and going to airride. Currently with the dynaflow and a torque tube....searching for options. Any guidance is appreciated. I will post the progress and education received !
Parts list completed by Jimenez Bro's, they cherry picked all the items I needed. Pretty straight forward, removed springs replaced with bags and new perches. With all the air out, the torque tube is flush with the body, frame sits about 3 inches from the ground. Needs a small C notch and tranny tube cut to lay on the ground... trimmed the bump stops down to the bare minimum. Cant turn when aired down unless you heat up the steering arms (which I did not do)...