Looking for the "windshield trim piece" for a 31 A Roadster. It's the piece that goes close to the windshield that you screw the rear of the gas tank or panel. Only found it on Mac's A Parts. Looked all over. Rather have an original; Tried calling a few vendors but nothing. Have a friend coming off vacation next week I'll ask .Trying to get the cowl complete. ....Anyone know where else would have one?
I don't know if this guy is still around or not. I haven't been there for about 5 or 6 years, but he had barns full of original Model A stuff and did repairs and restoration. A really nice guy, you might check it out. Bill's Model Acres Ford Farm Farm in Northumberland County, Pennsylvania 3355 8th St Dr, Watsontown, PA 17777 Phone: (570) 538-3200
He is still around and a great guy to deal with. Hugh collection of A parts. May have what you need. Put together a set of axles and rear brake drums for my phaeton last summer.
I usually buy original pieces at the model t/a swap meets. Try the model t forum. Tell them I sent you... Sent from my SM-G973U using The H.A.M.B. mobile app
That's not a hard piece to come up with. Keep looking around before settling on a repo you will fight with.
Yes I think so. It hold back of the tank down I assume it's a roadster one Closed car as you know a lot more than me is different. Are you selling it ?
that fits here? that one is not for sale, but I will look around to see if I have one. I just wasn't sure what part you were looking for.
I goes right in front of the windshield and you screw it down from under the dash with about 8 bolts. Holds down the piece , tank through the body
Try Berts Antique Auto, (800) 321-1931. They get a lot of good comments on fordbarn. Charlie Stephens
Check Sloppy Jalopys from Maine. He is on The H.A.M.B. frequently. He is on the next page after yours today.
is this the part you are looking for? "This is the reinforcement bar that ties the two cowl posts together. The Dash rail covers this. Used on the open cars only" https://www.brattons.com/30-31-dash-reinforcement-bar.html
Go to the FordBarn Model A Swap sight.......Wanted , and post there or as Charlie suggested : Bert 's in Denver. Paul in CT
I called Bert's Steve has repops. They don't fit right need work. Looking for an original. I may be able to get one this coming week Txs
Harleycontractor: I'm in New Britain, had a Model A for 9+ years, got a 40 coupe about a year and a half ago. Black w/jump seats, black R&P interior, 48 block,Almquist intake w/2 chrome 97's, Kogel Hi Comp cast iron finned heads, Red's headers, Smittys, 39 Tranny, dual spotlights. Had one very similar 50+ years ago when I got out of the service. Paul in CT
The Jalopy Journal
