Console has tach, untested, shifter, courtesy lenses intact, has some cracks in the plastic and no glove box liner. The hinge on the lid need to be re-riveted. I got a little heavy handed opening it for the first time, it was stiff and pulled the small rivets holding the lid to the hinge apart. Oops. I have all the braces and screws that came out of the Olds with it. All the wiring is intact as is the shifter mechanism, but no linkage to tranny. The project car this was going in is sold so it's time this moves on too. Turn signal switch on column is loose, probably bad, wheel has some cracks. Column is NOT tilt. Expensive to ship, would prefer somewhat local. Might travel a little for gas. 208-880-3238. Joe.