Is there a common threaded fuel filter similar to this with 9/16 IF fittings or are they all metric? Loosk like the common GM ones are all metric.
I ended up using one with barbs and pushed the rubber hose on with a clamp. Needed some flex room anyways
https://www.summitracing.com/parts/ear-230626erl https://www.summitracing.com/int/parts/ear-230616erl https://www.summitracing.com/int/parts/ear-230606erl https://www.summitracing.com/int/parts/fra-960001-bl
@Voh This is the style that goes in the filter in your post. These are GM fuel injection fitting's. You can make them with the correct flaring tool.
Yes, THAT one is metric. But he wants one with standard inverted flare. I have been looking for one myself.
AC filter # GF-90 for mid '60's fuelie 'Vettes. Details in this thread: https://www.jalopyjournal.com/forum/threads/fuel-filter-with-5-16if-fittings.1188290/#post-13506170
"AC filter # GF-90 for mid '60's fuelie 'Vettes. Details in this thread: https://www.jalopyjournal.com/forum/threads/fuel-filter-with-5-16if-fittings.1188290/#post-13506170" The filter referenced in that thread is for 5/16" tube, which uses 1/2 NF threads. 3/8" tube uses 5/8 NF threads. There's no standard inverted flare nuts with 9/16" threads, but maybe that oddball size was an automaker's special.