Hot Rods K-member for a Model A frame.

I'm building a '26 roadster on a model A frame. I'm starting to work out crossmembers. I seem to remember someone used to sell 2 rails that went from the middle crossmember to the back of the frame. Can't remember who, and cant find anything when I searched. Can find them for a '32 frame, just not an A frame. Can anyone help me out with who sells them. I built my own for my modified from 4" square tube cut down the middle, but drilling the holes took ages. Knowing how much time it took to make them, I would rather buy some. If I can't find any, I will make my own again.
Cheers,
Stewart

 

Dagel’s used to have an x member similar to a chassis engineering kit if that’s what you are referring to

 

That's the name! Not how I remembered it though. Being old sucks.
Thanks.
Cheers,
Stewart.

 

You still get to recall olde gems:
Like, Studebaker-Tickled-Pink!

 

I think someone took over dagels products but I can’t remember the name I believe he was an English guy in the orange area

 

I think they are still in Oregon.
https://dagels.com/2019/01/

 

Dagel's!