I've made another tool to help with the next job on my project.. What do you think it's for? Sent from my SM-G960F using Tapatalk
It's for drilling the pilot and main hole for chain drilling my ford I beam ... drill one and put the guide in the hole .then you get a perfect center for the next Sent from my SM-G960F using Tapatalk
still start in the center ALWAYS Maybe you’re going to start with a hole at center or maybe you’re going to start with 1/2 of the distance between holes but it’s still the center no matter what
You've got distance between the holes nailed. What about rotational, Trevor?... height location... up and down. Something to do with the notch in the block? Sent from my VS835 using The H.A.M.B. mobile app
The tool fits in the recess of the beam ans6i simply g clamp it in place Sent from my SM-G960F using Tapatalk
nice idea i might have to rob that, never thought of making a pilot hole jig but it makes perfect sense, thank you sam
Something like that would have helped. Maybe if I drill more axles. Sent from my SM-T350 using The H.A.M.B. mobile app
Threads like this always make me feel dumb and uncreative. There are some smart and clever people on the HAMB.
DEFINITION G-Clamp [ˈjē ˌclam-P] NOUN An uncomfortable binding condition that occurs when a G-string is worn TOO TIGHT as underwear or by striptease performers.