Technical 55 57 chevy trans mounts help in my 32 ford chassis.

I’m running an unsplit wish bone and there should be plenty of clearance for the exhaust pipes hope this helps a bit


Sent from my iPad using The H.A.M.B. mobile app

 

They're not known to be tough, especially with whatever rubber they use in the reproductions. Many people put a pair of bolts through them.

That's what I am going to do to mine.

We just got finished fabbing a set of mounts to run them in my A chassis.


The mounts @Kiwi Kev made for his scatter shield (in a Willys):

 

I started out your way. Just trying to get this tucked up out of the way. Going back to the correct position on mounts. Making a bolt in bracket now. Thanks all for your input

Sent from my SM-N960U using The H.A.M.B. mobile app

 

I am going to do the pair of bolts thru them too

Sent from my SM-N960U using The H.A.M.B. mobile app