City: Vancouver State: Washington City: Vancouver State: Washington City: Vancouver State: Washington City: Vancouver State: Washington City: Vancouver State: Washington Prices include shipping unless stated. I’m not gonna make much on these due to shipping costs, but I’m cleaning up the yard and stuff needs to go to build more hot rods. If I’m netting nothing or taking a loss on shipping I’ll let you know, but I think the prices are reasonable. Thanks! ‘40-‘46 backing plates w/ wheel cylinders and hardware. I have the original bolts in a bin I will include. SOLD ‘37-‘41 wishbone yoke/ball. Ball has some pitting - $20 shipped. Model A wishbone ball, nice. Can be used for ‘32-‘34 wishbone repair. $40 shipped. Model A wishbones cut at the yoke - SOLD Model A headlight bar - $50 shipped. Model A front spring (top leaf is about 1/2 missing - $75 shipped (unless shipping sucks then we’ll work something out). 1932-34 spindles. They are in pretty decent shape. I just bought a complete ‘33-‘34 front end so I don’t need these anymore. $175 shipped. 1940-48 front hubs. They are not an exact match, one has a threaded cap and is slightly thicker (46-48???). This one has had some studs tack welded on the backside, but I believe it is still usable with some work. SOLD 1940-46 front hubs. Although these look pretty crusty, they are nice and lubed up inside with bearings and seals still intact. SOLD Wide 5 wheels and drums. The wheels are in excellent shape and took me several years to find. There are 4 wheels total: 2 wheels with 1 hub cap clip missing, but I have a junk wheel I could grind the clips off for you if needed. The drums- 3 rear drums, 2 fronts, pretty crusty, good for mock up, but beyond that I’m not sure (fronts are way oversized and rear are rusty). They are all finned and fins are intact. I’d like to get $100 for all of this, and I would prefer not to ship. 1940-48 panhard bar (rear). Not sure if all bends are factory and not sure which year specifically. $40 shipped