I like how Jesse just bends the panel to fit in the machine. Who does that? Sent from my SM-G920V using The H.A.M.B. mobile app
Neat video but it seems odd it would get put up on Youtube 4 years after he has left Austin Speed Shop.
It's an old video it's been years since Bob Bleed worked there as well. Jesse is not a part of Austin Speed Shop in any way any more Sent from my SM-G950W using The H.A.M.B. mobile app
I see. Jesse recently, within the past couple of months has said he still had some level of ownership. But I wouldn’t know whether that’s true or not Sent from my iPhone using The H.A.M.B. mobile app
cool video. i was surprised he wasn't afraid of bending the panel to jamb it in the bead roller but didn't finish the ends of the beads off to take the tension out.
Contact info on Facebook. https://m.facebook.com/MidwestFabrication/ Checkout the kickass HEMI- Powered 32 pickup!
That episode is streaming on Amazon Prime now, FYI. https://www.amazon.com/Jesse-James-Austin-Speed-Episode/dp/B074NB3KQZ
The YouTube video has been gone a while. If you've got an Amazon Prime account it SHOULD play. I'm at work behind a firewall so I can't check it rn.
Yes, Bob is back in Wales/Delafield Wi. Midwest Fabrication has been having top chop classes lately. They just did a class on chopping a top on a 1941 Ford coupe just a few weeks ago. I drive pass the shop weekly and always try to get an eyeful of whatever the current project or projected project that are sitting outside at the current time.
The Jalopy Journal
