1929 Model A Sedan - 6v Banger w/ Standard 3spd - Carter WO Downdraft Carb - Handmade Intake Manifold - Geardrive Lake Header Kit - New Hoses and Belt - 16”/18” Wire Wheels - Firestone’s Front and Read (new) - Chassis Engineering 4” Forged Drop Axle - Speedway Front Spindles & Bearings - Chassis Engineering Reverse Eye Drop Leaf - Tube Shocks (front) - Friction Shocks (rear) - Speedway Steering Arms - Handmade Spoon Pedal Assembly - 60’s Dual Reservoir Brake Master Cyl - F100 Self Energizing Juice Brakes (front) - Early Ford Juice Brakes (rear) - Speedway Rear Hubs & Bearings - Modified Ford Rear Spring - SW Mechanical Water Temp Gauge - 5 Gallon Aluminum Under Body Cell - 3.5 Gallon Moon Expansion Tank - Electric Fuel Pump w/ Holley LPR and Tank Selector Switch - Earls Fuel Line - Newly Redone Floor Boards - New Repop Ford Script Caps - Handmade Leather Hood Straps - Ford Headlight Bar Dropped 3.5” - Louvered Stock Hood Car was redone in 70’s. I have receipts for paint, interior, and mechanical work from then. Paint is sweaty but looks right. Pinstriping was done at the time of paint. Bodies solid with normal wear for the age. Interior could use going through cause it hasn’t been touched. Top is in real nice shape. Runs great, brakes will need final adjusted again when the new pads are worn in a little and are done seating up with the drums. Tires have less than 100 miles. Speedo doesn’t work and horn isn’t hooked up. I believe the windshield wiper works but i disconnected it because it’s basically useless anyways. It’s in the trailer on the way to Bonneville as we speak, and will be out for sale. Clear Ohio title in hand. Don’t need to sell but have my eyes on another build if it does. PM me for more details or contact info. Price is negotiable. Regards, Luke