Technical lets see some 28 9 roadster dashes

I am trying to come up with a dash for my A v/8 roadster . I have 2 5/8 gauges with a 3 3 /8
speedometer.Let me have some ideas.
Thanks,
jim

 

This is mine with old 2 5/8" gauges. I made the dash panel and the birds eye maple piece over the top. I've been enjoying them for 20 years.

 

I like the larger gauges, with a small speedometer. Yours is esp nice.
thanks,
jim

 

This is a work in progress. The dash is a 1937 Ford unit. Being I'm Flathead powered I wanted gauges that looked and worked correct. It will use all stock 37 Gauges and spedo. I also like the fact I'll now have a glove box. Minor job with good results for this project. I was actually able to mount the 40 steering column and use the locking key switch. It kind of all just fell into place. I know the 28\29 is a bit narrower but there's plenty of material to trim off should you want to try this set up.
The Wizzard

 

Tried a 50 ford dash on a 31 roadster. It didn't work out. Yours looks good. A friend has a 31 coupe with a 35 dash.

 

Here's mine.

 

Here's mine. It may have a few things you're not going to need . . .

 

trimmed these dashes ... … for '30-'31 but could work on the '28-'29s...

 

Anymore out there ?

 

I like the way Henry designed it.