Hot Rods What's everyone holding as far as early Hemi speed parts?

I would consider it, but I’m in the Uk so shipping may make it uneconomical

 

Not sitting around, it is the motor in my avatar. Not so clean and pretty anymore.

 

here is the Hydro adaptor to my long bell 331 that was my high school grad present in '67.

 

This is my Quality Engineered Components (RR73 here on the H.A.M.B.) adapter that makes the back of a hemi look like a 360 small block. Fits A727a Torqflites or New process 833 4-speeds.
The absolute finest adapter ever made for the early hemi. This is my third one. I'm a believer.

 

How about a pair of Fenton finned valve covers for a 392 with Fenton casted in up sidedown

 

Block is 1957 392, crank is stock, Crower magnesium 8 hole injector is early. That's about it realy.

 

That valve train is pure porn

 

Holy sh#t !!!

 

Is that going in that little Topolino altered car?

 

I bought a set of adjustable rockers ( factory) for my 392, imagine my surprise when in the box with the rockers were this set of very nice sand cast aluminum valve covers. These were not part of the deal another words I didn't buy them. Called the seller up and he said "I don't want to miss with the shipping just keep them" . Now to find someone to polish them. I really like the look of the sand cast, but it is impossible to keep them clean.



This motor I bought as a standard bore 58 392, came with a brand new set of Jahns pistons as well. Trouble was it turned out to be .120 over stock, it will be a spare motor for my Model A just carbs and not the blower.

This is the blown motor I am just finishing up for my Model A, it's getting close.

This 354 I bought from a guy building a roadster, when he found out how much one of these critter cost to rebuild he was done. Bought a 350 Chevy instead, his loss my gain.

This 58 392 I bought from a fellow HAMBER in Georgia, thanks Eddie but this was a not a fun deal, old Eddie had no give in him at all, I guess that was cool as I paid the money. N o plans for this one yet but it will for sure go into a hot rod.

 

About the most beautiful sight in all motordom.

 

Some of my speed parts:

 

Must have been made for the Australian export market.

 

Not exactly "hoarding", as much as "left with".... More than several pairs of DeSoto valve covers, several intakes, a '56 330 and a '57 341.

 

I need some alone time with this picture!

 

I'm going to try and make an attempt at building a chain driven Hemi!
Hilborn says that the 4-port came from K S Pittman's brothers car Paul.

 

This is the only one that I know of and possibly from a boat.

 

Ansen 392 girdle.

 

Here are some of my stash, no where as nice as others but cool I think.

Original wilcap adapter, 392 to 727 and still in the original packaging.

Crowed U-fab 6 deuce intake

Cragar adapter, early MOPAR to Flathead toploader. Even have an NOS Weber flywheel to go with it.

Cliff

 

I'm holding a couple Dodge 270 blocks, a pair of hemi heads and some rocker arms and shafts, plus an oil pan

 

Found a picture from the late 70’s.

Cliff Ramsdell

 

For a 354

 

Man !

 

392 fairbanks

 

some weird 392 davco magneto

 

Spalding flamethrower for 331/354 hemi.


Sent from my iPhone using The H.A.M.B. mobile app