Technical Drum to disk conversion

I am wondering if anyone can help me with the identification of the rear end I have? I believe that it might be a chevy 10 bolt. The flange measures from the top to bottom bolts 2 7/16", and from the bottom bolts messuring across 2 11/16" center of each stud.

 

Looks to be a GM 7.5 or 7.625 rear that came in a lot of stuff. A lot of 68/70 something Nova and clone rear ends along with Camaro rears got stuck under those trucks
A guy would have to investigate a bit but you might be able to use late 70's Camaro/Firebird disk brake pieces.
Check out this article. http://www.hotrod.com/articles/ccrp-1204-budget-gm-rear-disc-brakes-swap-junkyard-builder/

 

Have a look at this page, might help.
http://www.novaresource.org/axle.htm

 

Thank you Sasrod and Mr 48 chevy for the info. Both of the sites that you have mentioned were very helpful.