Technical Ford 9” Big Bearing Old Style Axle Flange Gasket Part Number?

I have looked all over and cannot find the correct axle housing flange gasket for my Ford 9” big bearing old style flange. It’s the one that is shaped like a “D”. Does anyone know the correct gasket part number?

Thank you,
Zak.


Sent from my iPhone using The H.A.M.B. mobile app

 

They are not really necessary, if you want to use something wipe a bit of silicone on it and bolt up the backing plate.

 

^^^^^ black silicone and forget it

 

Okay, I’ll just use some RTV on it. Thanks guys.


Sent from my iPhone using H.A.M.B.

 

I don’t know I have ever seen a replacement gasket and I worked at Ford dealer in parts Dept


Sent from my iPhone using H.A.M.B.

 

You can cut odd ball gaskets out of breakfast serial boxes.

 

8 inch small bearing is Felpro 55035...i think you need 55036?
as said , you really don't need them

 

don't do like my buddy did one time , cut a gasket out of a nice hand held fan , near perfect , made in 1934 date on it , made me sick .

 

I've been looking all over the place for these, but cant find a source. I'm sure gasket maker would be fine, but I'll probably end up making a set.

 

No gasket required. https://www.currieenterprises.com/axle-seals

 

https://www.currieenterprises.com/axle-seals