Ask everyone on the HAMB, if they would like to have it. Bet there would be a lot of people who would love to have it!
A couple sos pads attached to the wiper arm and presto a clean windshield every time Sent from my iPhone using The H.A.M.B. mobile app
Amen.... I am loving this build....the cars that run the TROG all have that same look...old school for sure...thanks for posting all the details on here... MikeC
Your car looks great and keeping us updated with pictures is awesome. I know you are crazy busy with this project and work. If you get a chance could you take some pictures of the radiator mounts and fan clearance. I am mounting the radiator in my 32 and I have similar 8ba with the fan mounted under gen. From what I could see from your pictures you mounted the radiator about 2 inches forward of the stock location. Not a big deal without fenders or hood to be lined up. I am thinking at least an inch for fan flex. No rush, thanks in advance
I actually flattened the firewall and moved the motor back a few inches to make room for the stock 8ba fan. The radiator seems to be in the correct spot because the stock hood still fits.
My bad, saw the radiator tabs drilled at the back edge, water pumps looked to be the same location as mine and I am using stock K member and it did not look like the driveshaft was shortened so I assumed and you know what assuming does. Car looks great, nice job
Bad ass. Have fun on the sand, think you might end up bring a fair bit back with you with no floor! Sent from my iPhone using H.A.M.B.
This thing is almost a 32 that somebody would want. Sent from my iPhone using The H.A.M.B. mobile app